Modern Buddy

NASRA

I was told that the VCOA will be mailing out your bag.

NASRA

The same weekend as Amerivespa, there will be a Pride Fest in Indy, with a parade on Saturday morning, which we strongly support and endorse. We've reached out to the parade organizers and they would love to have a group of scooters from all over the country in their parade. There will be an organiz...

NASRA

Not sure. I'll have to ask Jac.

NASRA

We did a BOGO Black Friday sale. That's about as close to free as it gets.

NASRA

Free truck and trailer parking only four short miles away from the host hotel at the NOMAD Skate Shop. Let's rally!

NASRA

Looking forward to it!

NASRA

Hey gang, Jeremy with Amerivespa Indy here. I thought this would be a great way to keep everyone in the loop in regards to our big event this June in Indy. We're really looking forward to showcasing our city and bringing everyone together for one of the biggest and best rallies yet. If you haven't h...

NASRA

Hi again, Sorry we have been away so long. Our race team has taken off and we have been super busy tuning those bikes and holding events ect. Here is a link to the ceramic coated bridged exhaust kit. http://www.enviromoto.ecrater.com/p/14180838/ncy-street-race-70cc-for-genuine Here is a link to our ...

NASRA

peabody99 wrote:would it go faster with a windscreen and a petite rider?

Absolutely.

NASRA

##### For Immediate Release ##### Twist & Gone! 2011 comes to Brown County Dragway Scooter Racing, Music, cool people, and fun come to you from NASRA Contact: Jeremy Hall, NASRA President Phone: 317.938.5021 Email: twistandgone@gmail.com The North American Scooter Racing Association (NASRA) will...

NASRA

1.Pre-Registraion will remain open until May 10th. Pre-Registration is the only way to get a free event t-shirt and a swag bag. A bag which holds your free t-shirt and a assortment of mystery items. Register today! 2. Kill switches no longer required Basic Gear and a well maintained scooter is all ...

NASRA

jasondavis48108 wrote:hey, wait a minute, I just realized that you said you were at thunderdrome, damn that's close by and I didn't get to go cause I was giving finals

Maybe next year, I'd totally love to check out Frenchy in action

We'll be there again in September.

NASRA

that was awesome! I didn't even realize that the NCY forks were compatible with the Buddy 50s, What a great upgrade. :D For the record the front end I used is not the same as the 150cc Buddy's and is currently be developed by Enviromoto.com. Once we feel the product does as advertised we will relea...

NASRA

I did forget to mention that we upgraded the motor with the new NCY Ceramic Bridged port kit. The difference between the two will straight rock your face completely off.

NASRA

Hello gang, Today we are installing the NCY 200mm Big Brake Kit, NCY Performance Forks, and getting Frenchy ready for the road course with some safety wire. http://i251.photobucket.com/albums/gg288/Enviromoto/Frenchy/DSC00827.jpg We'll start with the forks. http://i251.photobucket.com/albums/gg288/E...

NASRA

www.TwistandGone.com http://i251.photobucket.com/albums/gg288/Enviromoto/TG112001.jpg Who? The North American Scooter Racing Association What? Scooter Drags, Swap Meet, Camping, Entertainment, Raffle, and much more. Where? The Brown County Dragway 480 Gatesville Rd. Morgantown, Indiana. When? Saturd...

NASRA

Just want to update everyone on where we are with this build. We installed the Prima Ceramic 72cc kit and its a beast. Problem is we only had one more race to tune it with and honestly its not ready. Now that the race season is over and the winter is setting in we will have to wait till next season ...

NASRA

Scooterworks Drag Race Series round 4 update. http://i251.photobucket.com/albums/gg288/Enviromoto/DSC08757.jpg http://i251.photobucket.com/albums/gg288/Enviromoto/DSC08796.jpg After we installed and tuned the Scooterworks stage 1 kit we ran a 16.11 @ 39.23 mph. With the 72cc kit, intake, carb, and 5...

NASRA

Time to tune the transmission. http://i251.photobucket.com/albums/gg288/Enviromoto/Frenchy/DSC08671.jpg Step one remove the CVT cover. http://i251.photobucket.com/albums/gg288/Enviromoto/Frenchy/DSC08672.jpg Now break out your impact gun and remove the variator and clutch. http://i251.photobucket.co...

NASRA

Scooterworks Drag Race Series Round 3 Results. After we installed and tuned the Scooterworks stage 1 kit we ran a 16.11 @ 39.23 mph. With the 72cc kit, intake, carb, and 5G rollers we ran 14.50's @ 47.07 mph! Thats a 7.84mph increase in speed in the 1/8th mile. Top speed hasn't been recorded and won...

NASRA

Alright boys we know the bar setup on the buddy looks good but it just dont work that great at the track. Not only that but we just like the way the motocross style bars "feel", no speedo or crap to get in our way. Goodbye stock bars. http://i251.photobucket.com/albums/gg288/Enviromoto/Fre...

NASRA

Before we put the motor in we installed the Keihin PE- 26mm carburetor, Pinasco Reeds, and NCY intake. You can see the difference in size. Somebody threw away my notes on this one but believe me its a HUGE difference in performance and money well spent as long as you dont care about your fuel mileag...

NASRA

I had the opportunity to check this out in person at the Indianapolis MotoGp. It had a nice seat with a really comfortable riding position. If the engine performs as well as it looks it should be a hot item. The aftermarket has already gone to work. http://i251.photobucket.com/albums/gg288/Enviromot...

NASRA

I respect scooters for what they are, not what I want them to be.

NASRA

[70-ish steps of installation deleted] These Prima kits are truly bolt on and go :) Yeah, that's pretty much plug-and-play. And here I thought it might be complicated. :? We intend to get way more complicated with port timing, mapping in the future with the Prima Ceramic kit we have. From what Scoo...

NASRA

Thanks guys I do my best.

NASRA

Yea I would start out with a 95 main. The Buddy 50 2t transmission components are the exact same one's the 139QMB GY6 50cc engine uses. If you need any parts pm me and Ill direct you to the right spot. You dont want to run contra spring unless you have a big bore kit installed. The engine wont have...

NASRA

Been awhile since I lasted posted a update, been super swamped here in the shop. However we have a lot of ground to cover so lets dive right in. How to install a Prima 72cc Iron Big Bore Kit in your Buddy 50 2t. Remove seat bucket. http://i251.photobucket.com/albums/gg288/Enviromoto/Frenchy/DSC07599...

NASRA

Yea I would start out with a 95 main. Can you guys provide some insight as to where you guys got the replacement clutch springs? I have not been able to find them online so i called scooterworks today and the sales person i spoke to said they only had had the stock replacement springs. My mechanic ...

NASRA

Well done, Nasra. I hope to hear more as your project progresses. I have a Buddy 50 that has been kitted to 70cc. I am using the stock exhaust, stock carb with factory jetting, stock air filter, plastic reeds, 1000 contrast spring, and 6 gram sliders. My scoot accelerates very well up to 20/25 mph,...

NASRA

Hope too but thats a long haul from Indiana. Hopefully we can find a old abandoned airport around here that will let us do a few passes once its ready.

NASRA

Yea I would start out with a 95 main.

NASRA

The air box mod question was for NASRA. If you take your airbox off you'll see the intake tube on the top near the carb with two small screws holding it in. We simply removed the screws and removed the restriction. This way we were able to keep it reliable and still help it breath. Currently we are...

NASRA

I did and it worked good, but in the 1/8th it wasn't the best setup for us. You really cant go wrong installing stiffer clutch springs if you need better acceleration.

NASRA

so your back to the stock compression spring? what did replacing the pill springs w/ the 2000rpm do in terms of take off and top end? Just currious as right now I'm running the 1000rpm compression spring from NCY and 7.5g sliders and my top end is fairly good (50-55 mph indicated) but the accelerat...

NASRA

jmkjr72 wrote:so just a contra spring and no stiffer clutch springs with this set up

As of right now we removed the contra spring and installed a set of 2000 rpm pill springs. Not the best setup for the street but we are working real hard at getting our rpm's up at the track.

NASRA

Thanx NASRA, I feel like I've learned more about my scooter in the last couple of weeks than I have in the two years I've owned it :lol: Thanks this is the reason we are doing the "how-to" articles, so you guys feel more comfortable with your machines and performing upgrades. We have been...

NASRA

Round 2 in the books. Good times indeed Bonegirl.

http://www.scooter-racing.net/Scooterwo ... ies/?p=196

NASRA

The Ohio YSR League (OYL) has been racing YSR's, Motards, and Scooters since 1999. After speaking to Scott Smallwood and OYL President Brian Conrad we have decided to see who wants to get scooter racing going again in Central Ohio. The next OYL event is July 24th @ Circleville Raceway Park in Circle...

NASRA

Thanks for the update. As you know I've just installed the stage 1 kit as well. I didn't remove the intake hose but just plugged it and zip tied it up out of the way. Would it make a difference if I just removed the hose completly? I went with the 85 jet, but havn't been able to do the plug chop co...

NASRA

Correct.

We have plans for this transmission.

NASRA

Prima Stage 1 kit installation and review. http://i251.photobucket.com/albums/gg288/Enviromoto/DSC07237.jpg The Prima Stage 1 Kit comes with: Prima exhaust & all necessary hardware including gasket 6.5G Prima Rollers 1000 rpm torque spring 3 jets 85 - 90 - 95 As you can see the pipe has a nice o...

NASRA

If you pull the airbox off you will see the intake hose held in with two philps head screws. Thats the restriction I am talking about. We used a free flow performance air filter vs a de-restricted air box. We had better results with the airbox since the carb and intake runner is so small. There will...

NASRA

A proper plug chop is easy to do. Step 1: Bring scooter up to operating temp Step 2: Run wide open for about a block Step 3: While holding the throttle wide open shut off the scooter and coast to a stop. Step 4: Inspect plug While working with a few different setups on Frenchy I found out the 95 mai...

NASRA

Just hold the rear wheel and use the impact to install the nut. wow, you can do that? Do you have some special tool that regulates torque on the imapct wrench or does the torque value just not matter that much on the variator and clutch bell nuts? I do it mostly on feel. I have my impact set to ham...

NASRA

Just hold the rear wheel and use the impact to install the nut.

NASRA

A good investment is a 36mm socket and a electric impact gun if you plan on tinkering with your CVT. Makes life so much easier.

NASRA

Maybe ask if you can have the stock motor mount?

NASRA

Are the buddy motors top or bottom mount?

NASRA

If you do this often a company called ZTR racing products makes a nice tool to help get the job done. I have one in my shop and I love it.

Modern Buddy

Search found 72 matches

Amerivespa Indy AMA

NCY 200mm Big Brake, NCY Performance Forks, and Safety Wire

Twist and Gone! 2011

NASRA and Ohio NSR Leage July 24th (Scooter Racing)