olive the reserection

jmkjr72 · Posted: Sat Feb 20, 2010 12:21 am Post subject: olive the reserection

back in september a cager tried to run me over while i was riding olive (my stella)
well she was considered a total loss even though she was rideable
the front fener was bent up and scratched thru the steel
same with the left side cowel
the left mirror was damaged
along with the leg shield trim
there was a dent in the rear fender/frame under the bumper
and to top it off she wasnt running right
but withen days of finding out even though she was totaled i was able to keep her i started fixing her
got her running right (broken grounding strap on the coil)
and started ordering goodies new and used

non cat stock style exhaust maybe soon to be swaped for a simminoe pipe

24/24 carb so its ready for future mods

now to start making her one of a kind

yep thats right a 39 ford teardrop tail light will replace the ugly stocker

i know have a hole in the fender and have fixed the dent in the fender

now she is ready for primer and body work paint will come later after i fix the cowels and do what ever other body mods come to mind like cutting up the bent up stock fender

running light

brake light

[/img]

bigbropgo · Posted: Sat Feb 20, 2010 1:04 am Post subject:

i like anything custom. great job. great to hear you got some things worked out.

Skootz Kabootz · Posted: Sat Feb 20, 2010 5:39 am Post subject:

Nice! Looking forward to seeing the final product. And excellent job of making lemonade out of a lemony situation.

KRUSTYburger · Posted: Sat Feb 20, 2010 4:11 pm Post subject:

Sweet, I saw your progress on Stella Speed. Are you planning to re-paint it all the original color (I'm guessing yes by the name) or doing something different? Looks good so far!

jmkjr72 · Posted: Sun Feb 21, 2010 1:20 am Post subject:

im thinking about staying with the same color maybe some sort of satin or semigloss black graphics
i say a sticker with animal(from the muppet show) i liked but is says drive instead of ride so if i figure out what i want i will paint the black place the sticker or masking and then spray the advacado again i did find the ppg codes
i still have to figure out what im going to do for rear turn signals
i had wanted to put 59 caddy bullit nose lights but they are too big
so im looking for some domed 2 in dia marker lights for a truck

besides it will still be a few months before it will be warm enough and dry enough to paint (i have no heat in the garage)

vaderscoot · Posted: Sun Feb 21, 2010 1:00 pm Post subject:

looking good i have thoose taillights in my 96 ford escort google vaderscort for pics

Kaos · Posted: Sun Feb 21, 2010 5:35 pm Post subject:

Thats an awesome hack. Looks good!

gr8dog · Posted: Mon Feb 22, 2010 11:20 pm Post subject:

Am I going to see Olive at the T.P. rally?

jmkjr72 · Posted: Mon Feb 22, 2010 11:23 pm Post subject:

i will be riding olive at the t.p the town rally if she will be finshed and repainted by then i dont know so she may look a little ugly but she will be there
infact she will be parked outside during registration and if its nice enough to ride on the 6th she will be sitting at river side rides on the 6th also (season opener)

jmkjr72 · Posted: Wed Mar 03, 2010 12:54 am Post subject:

well olive went out for a test run today

just seconds after taking her off the lift she had to go back up

one of the angles on the center stand was hitting the simonini pipe
so out came the grinder and off came the obstruction

im not worried about taking it out as the stock didnt have the cross braces so i doubt it is needed

wow

she runs like a top
i can now hit 50 indicated in 3rd and easily hit 60 indicated in 4th
i didnt get a good run as i was just going up and down my road and had to let off before i found the sand and the snow and ice on the road
a recap of the mods so far
vsx airfilter
24/24 carb
sominini pipe

Dan Buddy · Posted: Wed Mar 03, 2010 6:11 pm Post subject:

Where did you get the black engine cover(vendor & PN? Need to ditch my chrome one for the black one.

jmkjr72 · Posted: Wed Mar 03, 2010 9:35 pm Post subject:

i got it used so im not sure there is a lml tag on it so im assuming its oem

jmkjr72 · Posted: Sun Mar 14, 2010 3:46 am Post subject:

well i added a cht to her today as the plug chops look good but are on the lean side of good

the guage bucket is made from a bit of exhasut tubing with a bit of flat stock welded on and that goes to the mirror mounting locations

i know some people have been mounting them in the top of the glove box but i thought it looked better up high and it is more visable

Skootz Kabootz · Posted: Tue Mar 16, 2010 9:18 am Post subject:

Dude. Ya gotta lay off the coffee. The camera shake is terrible! Razz

jmkjr72 · Posted: Tue Mar 23, 2010 11:15 pm Post subject:

well here is the pic of one of the cowels on the scoot
i smooted the body line filled the factory turnsignals
and insatlled 1 in dia dot led truck running lights for turn signals
i have another set on the way and there will be 2 on each side

im not happy with the way it turned out
ill have to redo parts of it but its good enough for now

IM2Scary · Joined: 15 Mar 2010 Posts: 11 Location: Florida **Stella**

Likin' the custom work.

jmkjr72 · Posted: Fri Mar 26, 2010 11:24 pm Post subject:

all 4 new lights are installed and wired up
they are actualy brighter then the new tail light
so there are now 5 running lights on the back of her
2 left and 2 right turn signals
and one stop lights