Forums
 FAQHelp  LinksLinks    SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

2009 Buddy 125 mixture screw cheap hack

 
Post new topic   Reply to topic    Forums » General Discussion Previous topic :: Next topic  
Author Message
Bill61
Member


Joined: 17 Jul 2019
Posts: 21
Location: Everett Wa
2009 Buddy 125, Yamaha Vino 125, Yamaha TMAX, Honda Metropolitan

PostPosted: Fri Aug 09, 2019 10:31 pm    Post subject: 2009 Buddy 125 mixture screw cheap hack Reply with quote

If you have a tamper proof, non adjustable mixture screw on your carburetor, do this:
Remove with needle nose pliers.
Scuff top with 320 sand paper.
Cut the head off a steel screw. I used a 10-32 screw with an apex slot and a 5/16 6 point head.
Clean mixture screw and screw head with acetone.
Attach screw head to mixture screw with 2 part epoxy. I used ATACS brand. Let dry 24hrs.
I beveled surface of carb to allow for adhesive under screw head.
Install and adjust with a #2 apex bit or 5/16 socket.
Back to top
View user's profile Send private message  
Display posts from previous:   
Post new topic   Reply to topic    Forums » General Discussion Previous topic :: Next topic  Time: GMT

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

  Scootergear designed by riders for riders


Powered by phpBB © 2001, 2005 phpBB Group
All Content Copyright 2007-2011 by Modern Buddy. All Rights Reserved.