Scooter Parts!

sotied · Post by **sotied** » Thu Apr 29, 2010 7:50 pm

Yay, box just arrived and I taped it. Not the box, that was already taped. But I taped the OPENING of the box and put it online.

Here...

*Warning! Plenty safe for work and the sound from the start is echo-y but gets better in about three seconds.

<object classid="clsid:d27cdb6e-ae6d-11 ... ></object>

sotied · Post by **sotied** » Thu Apr 29, 2010 9:07 pm

That wasn't the easiest install ever, but it wasn't the hardest. Not sure I'm comfy with the way it's attached to the back rack, but it's on there pretty tight. Guess I'll really crank it down after a few rides.

Anyone else have issues attaching a top case?

Jeff

MYSCTR · Post by **MYSCTR** » Thu Apr 29, 2010 11:18 pm

OK - so we were wtahcing for the hottie to spring form the box... he he

Yes - get the blue Loctite. We tried different locations for the brackets on three Top Cases before finding what we liked that really held best. We used the black mounting bracket with the screws frm the Top Case directly into the mounting base nuts and then ran the bolts from that to the brackets under the rack.

Got to upload some pictures I guess!

Top Case is a great addition to the buddy you will get great use out of it!