Removing ignition on Buddy 50
Moderator: Modern Buddy Staff
-
- Member
- Posts: 1
- Joined: Wed Jan 11, 2017 1:20 am
Removing ignition on Buddy 50
So I need to take the ignition out of my scooter to get a key fitted for it, is there any place that could show me how to remove it? Thanks!
-
- Member
- Posts: 187
- Joined: Tue Sep 30, 2014 2:09 am
- Location: Southeast WI
-
- Member
- Posts: 367
- Joined: Wed Dec 30, 2015 5:43 am
- Location: College Station, TX
You need to take the windshield (big plastic piece on the front of the bike underneath the handlebars plastic) off the front of the Buddy. There are a number of screws that hold it to the bike as well as a bolt in the front. Next twist the ring around the ignition assembly about an 1/8 or so counter-clockwise and remove. Next remove the 4 plastic tabs that hold a collar around the steering column just underneath the upper plastic. Then there are a number of screws that hold the back of the leg screen in place as well as removing the bag hook. Once all of this is out of the way, you should be able to get a 10mm socket in to remove the two retaining bolts and the screw that hold the seat release wire.