Anyone know how to balance wheels?

Discussion of the Genuine Buddy, Hooligan, Black Jack and other topics, both scooter related and not

Moderator: Modern Buddy Staff

Post Reply
User avatar
mike932
Member
Posts: 152
Joined: Mon Apr 25, 2016 1:34 pm
Location: California

Anyone know how to balance wheels?

Post by mike932 »

I have a Buddy 170i. I mounted the tire wrong. The yellow dot on the tire is next to the air valve. I was thinking of duct taping a coin (a nickel) to the opposite side of the wheel to help balance the wheel. Anyone have any other ideas besides remounting the tire?
User avatar
charlie55
Member
Posts: 1924
Joined: Tue Apr 08, 2008 6:47 pm
Location: New Jersey

Post by charlie55 »

You got it right the first time. The yellow dot marks the lightest spot on the tire, so most manufacturers recommend that you mount it near the valve stem. That said, it's not an exact science. If you think it's not right for you, you could try breaking the bead and rotating the tire around the rim, or just get some stick-on weights. I'd avoid using tape as it will probably let go after a few wettings.

I use a simple balancing stand and stick-ons and have had good results.
Image
User avatar
mike932
Member
Posts: 152
Joined: Mon Apr 25, 2016 1:34 pm
Location: California

Post by mike932 »

Oops I meant the dot is opposite the valve. Thanks
User avatar
babblefish
Member
Posts: 3118
Joined: Tue Dec 04, 2007 8:42 am
Location: San Francisco

Post by babblefish »

If it were me, I'd do what Charlie suggested and pop the bead again and rotate the tire.
Some people can break a crowbar in a sandbox.
User avatar
DeeDee
Member
Posts: 1100
Joined: Sat Jul 26, 2014 5:07 pm
Location: Denver

Post by DeeDee »

Is it the front tire or rear?

If it's the rear, I'd just leave it alone. If it's the front, does it ride any different than before? If not I'd leave it alone.

If it's the rear, I don't think I would go to the trouble of pulling it off the bike, breaking the bead and moving the dot. Put 100 miles on the scooter. Does it ride any different than it did before? If not, forget about it.

You could always put in an ounce of these and call it good either way:

http://www.ebay.com/itm/STAINLESS-STEEL ... 2429366739
User avatar
babblefish
Member
Posts: 3118
Joined: Tue Dec 04, 2007 8:42 am
Location: San Francisco

Post by babblefish »

Just for general information, the local Genuine Scooter dealer here says it is not necessary to balance scooter wheels, although they will do it if a customer insists.
From personal experience, I replaced the front tire of my Buddy with a Michelin tire with no balance markings in a random position and have not noticed any vibrations or odd behaviors, at least not up to 55 MPH (GPS).
Some people can break a crowbar in a sandbox.
User avatar
Tazio
Member
Posts: 486
Joined: Tue Mar 27, 2007 3:59 pm
Location: Woodland Hills, CA

Post by Tazio »

I've found my Buddy wheels don't need to be balanced. I use Dynabeads in my Vespa and they work fine for me.
The Racer's Motto:
Broken bones heal,
Chicks dig the scars,
The pain is temporary,
but the glory is forever!
Georgetheman
Member
Posts: 1
Joined: Sun Mar 19, 2017 5:10 pm
Location: Stockholm/Phuket
Contact:

Post by Georgetheman »

As im not too good with vespas i came here to get some info when i was scratching my head to change the tire :). Just wanted to say thnx guys. Life savers!





storacasinoaventuret
Last edited by Georgetheman on Tue Apr 25, 2017 9:36 pm, edited 1 time in total.
George here!
User avatar
Dooglas
Moderator
Posts: 4368
Joined: Sun Jul 08, 2007 2:17 am
Location: Oregon City, OR

Post by Dooglas »

Georgetheman wrote: Just wanted to say thnx guys. Life savers!
Ah, you heard everything from orient the tire correctly, to static balance the wheel and tire, to use dynabeads, to don't worry about balancing. Which advice was useful?
Post Reply