Long story short I need to re-thread the throttle cable through the body of my Stella. Pulling the cable through with the old one ended poorly because I had a cable that was too short and the tape let go.
I get stuck near where the bolt runs through the two body sections.
Going the other direction, I can’t get up the tube.
I tried a fish tape but it gets stuck in the same place as the raw cable.
What’s the secret?
Stella Auto - throttle cable
Moderator: Modern Buddy Staff
-
- Member
- Posts: 6
- Joined: Sat Sep 27, 2014 7:27 pm
- Location: Milwaukee
- BuddyRaton
- Scooter Dork
- Posts: 3887
- Joined: Sat Sep 09, 2006 10:08 pm
- Location: Boca Raton, Florida
- Contact:
The easiest way may be to remove the horn cast.
For "fish tape" I use string trimmer line. From the behind the horn cast area you can go up to the headset and down and out to the tank area.
For "fish tape" I use string trimmer line. From the behind the horn cast area you can go up to the headset and down and out to the tank area.
"Things fall apart - it's scientific" - David Byrne
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL