Modern Buddy

Hey peeps I have changed the oil a couple times on my Stella 4T but I guess this time I got a little too aggressive. The metal cover for the oil filter cracked and one of the screws is stuck which caused the screw stem to come out. Anyone have a PDF of the Stella 4T Parts catalog or know where to find these parts?

Thanks

Wish you had asked advice first. That's an important one. At least you didn't strip the studs, which others have done. Those bolts just need to be snug.
Not sure if you're going to locate one of those in the US. I tried once and had no luck. My guess is your best bet would be http://www.tassouk.co.uk/ or SIP in Germany.

AF1 used to display on-line parts diagrams for the Stella 4T on their website, but they appear to have dropped it since the 4T was discontinued in the US. I believe most 4T parts can still be ordered thru ScooterWest. Their website is hard to use however. I'd suggest you call them.

Part number is as follows:

Cover comp. paper filter - SF513-0188

Looks like SIP has one:

http://www.sip-scootershop.com/en/produ ... +_51301880

Thanks for the information. That looks like the part on SIP I went ahead and ordered it.