Stella Auto - throttle cable
Posted: Sun Oct 21, 2018 6:03 pm
Long story short I need to re-thread the throttle cable through the body of my Stella. Pulling the cable through with the old one ended poorly because I had a cable that was too short and the tape let go.
I get stuck near where the bolt runs through the two body sections.
Going the other direction, I can’t get up the tube.
I tried a fish tape but it gets stuck in the same place as the raw cable.
What’s the secret?
I get stuck near where the bolt runs through the two body sections.
Going the other direction, I can’t get up the tube.
I tried a fish tape but it gets stuck in the same place as the raw cable.
What’s the secret?