Page 1 of 1
Piston Question
Posted: Fri Nov 29, 2019 3:05 pm
by whereshaldo
My crank failed on my Stella and in the seize it broke a ring. The cylinder is fine but the piston is pretty scored up. Does anyone know if the piston for a 5 port Stella is an LML specific part or can I use a stock piston from a PX150?
Hal
Posted: Sat Nov 30, 2019 3:13 pm
by milly
Might be worth cross referencing it on sip site or eBay see if they listed the same.
Posted: Sat Nov 30, 2019 5:59 pm
by whereshaldo
According to the Haynes book they are the same circumference, height and stroke but the LML has 1.5mm rings and I don't know if the ports in the LML are different than a 3 port piaggio piston.
H