Stella 4T stator resistance values

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
mjrally
Member
Posts: 28
Joined: Fri Feb 03, 2012 2:27 am
Location: Oceanside, CA

Stella 4T stator resistance values

Post by mjrally »

Can anyone with a Stella 4T get me a resistance value of the blue wire coming off the stator? Right now I get no continuity period.

Im trying to diagnose a bad regulator/ rectifier and think the problem might be at the stator instead.

Thanks everyone.
mjrally
Member
Posts: 28
Joined: Fri Feb 03, 2012 2:27 am
Location: Oceanside, CA

Post by mjrally »

Pulled the stator and had no continuity between the coils so I eventually found where one of the copper windings had snapped. Soldered it as best I could and then reinstalled everything and I had lights. To answer my initial question resistance was super low through the blue and black wires. Less than 1 ohm.
Post Reply