![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
blur tires need help
Moderator: Modern Buddy Staff
- teamhurst
- Member
- Posts: 108
- Joined: Fri May 04, 2012 6:08 pm
- Location: three rivers michigan
blur tires need help
Long story short seem to be having a hard time finding tires for the blur 150 not sure if there are different from the 220 but in any cases. Really need one for the back and might as well change the front. scooterworks don't have any in stock ![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
I scoot there for i am
blur 150
buddy pamplona 150
Stella
blur 150
buddy pamplona 150
Stella
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
www.bikebandit.com has them. Just search 130/60-13. I would recommend the Michelin tires if you value performance over thread life. I have the Michelin Sport Pilots (no longer available
) on mine and really like them. Huge handling improvement over the the stock Maxxis tires.
![Sad :(](./images/smilies/icon_sad.gif)
Last edited by babblefish on Thu Sep 03, 2015 9:07 am, edited 1 time in total.
Some people can break a crowbar in a sandbox.
- Meeners
- Member
- Posts: 26
- Joined: Fri Aug 21, 2015 3:00 pm
- Location: Cincinnati
Kenda K413's are a decent option.
I actually have a set of 130/70/13 brand new Michelin's that I would have no problem parting with if you absolutely needed a set. They came on the bike I purchased... Free + shipping cost to you. I had them on my rig and I didn't like the final drive so I went to Kenda K413's in 130/60/13.
Let me know.
I actually have a set of 130/70/13 brand new Michelin's that I would have no problem parting with if you absolutely needed a set. They came on the bike I purchased... Free + shipping cost to you. I had them on my rig and I didn't like the final drive so I went to Kenda K413's in 130/60/13.
Let me know.
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
The 130/70-13 tire has a bit larger diameter than the stock 120/60-13 so should make the speedometer reading more accurate, if that's of any importance to you...
The 130/60-13 that I put on the front of mine made a 2-3% difference in speedometer reading. It's only about 5 mph optimistic now.
The 130/60-13 that I put on the front of mine made a 2-3% difference in speedometer reading. It's only about 5 mph optimistic now.
Some people can break a crowbar in a sandbox.
- Meeners
- Member
- Posts: 26
- Joined: Fri Aug 21, 2015 3:00 pm
- Location: Cincinnati
Sir,
Just want to follow up. Things have been busy but i have your best interest in mind. I couldn't find a box for both tires. Are you okay with me just Saran wrapping them to ship them out? I don't like to not response so before you got worried I figured I'd come through and post publicly!
Meeners!
PS Let me know!!!
Just want to follow up. Things have been busy but i have your best interest in mind. I couldn't find a box for both tires. Are you okay with me just Saran wrapping them to ship them out? I don't like to not response so before you got worried I figured I'd come through and post publicly!
Meeners!
PS Let me know!!!
Meeners
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
FWIW: that's how internet tire stores normally ship tires, motorcycle or car. They usually wrap the shipping label under the clear wrap and/or zip tie a heavy duty shipping card to the tire (s).Meeners wrote:Sir,
Just want to follow up. Things have been busy but i have your best interest in mind. I couldn't find a box for both tires. Are you okay with me just Saran wrapping them to ship them out? I don't like to not response so before you got worried I figured I'd come through and post publicly!
Meeners!
PS Let me know!!!
Some people can break a crowbar in a sandbox.
- BuddyRaton
- Scooter Dork
- Posts: 3887
- Joined: Sat Sep 09, 2006 10:08 pm
- Location: Boca Raton, Florida
- Contact:
I think Meeners gets the Blur good scooter dude of the month award!
"Things fall apart - it's scientific" - David Byrne
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL
www.teamscootertrash.com
'06 Cream Buddy 125, 11 Blur 220, 13 BMW C 650 GT, 68 Vespa SS180, 64 Vespa GS MK II, 65 Lambretta TV 175, 67 Vespa GT, 64 Vespa 150 VBB 64 Vespa GL
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
- Meeners
- Member
- Posts: 26
- Joined: Fri Aug 21, 2015 3:00 pm
- Location: Cincinnati
Sweet!!! No problem!teamhurst wrote:Hay the tires came in yesterday morning at 11 am just as you described. thanks again man
Also, word of advise for installation: Once you get the tires mounted, Install the wheel on the bike with little to no pressure. This way it's easier to get around the rear of the motor! Later!
Meeners
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
- teamhurst
- Member
- Posts: 108
- Joined: Fri May 04, 2012 6:08 pm
- Location: three rivers michigan
-
- Member
- Posts: 277
- Joined: Fri Jul 03, 2009 6:59 pm
- Location: Atlanta, GA
Let me know if you source a front tire. I just had my rear one done and had to complain to get the correct size as they put a 70 series one on initially. They were able to get the correct tire eventually. I can't fine a front tire online(at least that I can order) in the OE 120/60/13 size. Maxxis USA's web site shows the OEM tires were have, but they don't seem to be available anywhere.
-
- Member
- Posts: 22
- Joined: Fri Oct 18, 2013 2:43 am
- Location: Redwood City, Ca
In the same boat here. I have the 2013 220 and my rear tire is showing braid. Dealership where I bought the scoot doesn't sell or service Genuine any more, so I'm struggling between trying to find an independent mechanic, taking a 4 hour trip to San Francisco, or taking the wheel off and taking it to cycle gear to have a tire installed. I'm leaning towards the latter. How difficult is it to yank the rear wheel from a Blur? Is there a write up somewhere? I managed to change the oil using an excellent write up I found here on the forum.
Secondly, Cycle Gear has Michelin, Avon, Pirelli, and Continental tires in the 130/60-13 (as an aside, scooter center in San Francisco says this is what they put on the fronts and backs). Amazon also has Kendra and Shinko of multiple flavors. Any recommendations on tire brands?
Thanks!
Secondly, Cycle Gear has Michelin, Avon, Pirelli, and Continental tires in the 130/60-13 (as an aside, scooter center in San Francisco says this is what they put on the fronts and backs). Amazon also has Kendra and Shinko of multiple flavors. Any recommendations on tire brands?
Thanks!
-
- Member
- Posts: 277
- Joined: Fri Jul 03, 2009 6:59 pm
- Location: Atlanta, GA
My dealer installed the Michelin Power Pure. It seems good so far. Not sure about a 130 fitting the front as someone just posted it wouldn't. As for removing the rear wheel- that is a big job. An oil change is child's play on the Blur(unless you have to change the filter which adds a level of difficulty). It amazes me nobody stocks the correct tire. It appears the OEM Maxxis tires are available in the UK as I see listings on Ebay. This is one possibility, but the shipping costs are high so you are looking at $150 bucks for a $50 tire. It is baffling to me that Genuine doesn't import the correct Maxxis tires themselves and distribute to the dealers. Another example of their piss poor support of the products they sell.RickWaza wrote:In the same boat here. I have the 2013 220 and my rear tire is showing braid. Dealership where I bought the scoot doesn't sell or service Genuine any more, so I'm struggling between trying to find an independent mechanic, taking a 4 hour trip to San Francisco, or taking the wheel off and taking it to cycle gear to have a tire installed. I'm leaning towards the latter. How difficult is it to yank the rear wheel from a Blur? Is there a write up somewhere? I managed to change the oil using an excellent write up I found here on the forum.
Secondly, Cycle Gear has Michelin, Avon, Pirelli, and Continental tires in the 130/60-13 (as an aside, scooter center in San Francisco says this is what they put on the fronts and backs). Amazon also has Kendra and Shinko of multiple flavors. Any recommendations on tire brands?
Thanks!
-
- Member
- Posts: 240
- Joined: Thu Apr 03, 2014 11:56 pm
- Location: Oakland, CA
The parts diagram distributed to dealers for the Blur lists the tires as "Limited Quantity." If this were a normal part (engine part, body panel, etc.), it might be cause for concern, BUT it's a tire. There are plenty of options for those as outlined in above posts. Genuine isn't a Tire Company - it's a scooter company.chickdr wrote:
My dealer installed the Michelin Power Pure. It seems good so far. Not sure about a 130 fitting the front as someone just posted it wouldn't. As for removing the rear wheel- that is a big job. An oil change is child's play on the Blur(unless you have to change the filter which adds a level of difficulty). It amazes me nobody stocks the correct tire. It appears the OEM Maxxis tires are available in the UK as I see listings on Ebay. This is one possibility, but the shipping costs are high so you are looking at $150 bucks for a $50 tire. It is baffling to me that Genuine doesn't import the correct Maxxis tires themselves and distribute to the dealers. Another example of their piss poor support of the products they sell.
As for "piss poor support," I'm not sure if this is trolling or a genuine (ha) attitude. Every single interaction I've had with Genuine has been positive - Parts availability, speed of shipping, warranty claims, etc.
-
- Member
- Posts: 277
- Joined: Fri Jul 03, 2009 6:59 pm
- Location: Atlanta, GA
The issue is there are NOT "plenty of options" for tires in the sizes we need as outlined above by many folks. Have you tried searching for a 120/60-13 scooter tire(probably not since you don't ride a Blur...)? How hard would it be for Genuine to stock the Maxxis tires we need? I am sure if they asked for them, PGO would make it happen. Personally, I like to have matched sets of tires on my vehicles. It would be ideal if I could get the OEM 130/60-13 Maxxis tire as the front tire lasts much longer than the rear. This way they always match.Yalzin wrote:The parts diagram distributed to dealers for the Blur lists the tires as "Limited Quantity." If this were a normal part (engine part, body panel, etc.), it might be cause for concern, BUT it's a tire. There are plenty of options for those as outlined in above posts. Genuine isn't a Tire Company - it's a scooter company.chickdr wrote:
My dealer installed the Michelin Power Pure. It seems good so far. Not sure about a 130 fitting the front as someone just posted it wouldn't. As for removing the rear wheel- that is a big job. An oil change is child's play on the Blur(unless you have to change the filter which adds a level of difficulty). It amazes me nobody stocks the correct tire. It appears the OEM Maxxis tires are available in the UK as I see listings on Ebay. This is one possibility, but the shipping costs are high so you are looking at $150 bucks for a $50 tire. It is baffling to me that Genuine doesn't import the correct Maxxis tires themselves and distribute to the dealers. Another example of their piss poor support of the products they sell.
As for "piss poor support," I'm not sure if this is trolling or a genuine (ha) attitude. Every single interaction I've had with Genuine has been positive - Parts availability, speed of shipping, warranty claims, etc.
I am not "trolling" - IMO Genuine is not good at supporting their products. They don't even have a contact email, or phone number on their web site. If you have personally been in contact with Genuine - how do you go about it?
I just got off the phone with Maxxis USA who has an office near me in Suwanee, GA. I asked about the issue and was told Maxxis goes after the OEM scooter producers in Taiwan where they are based but does not import many tires for aftermarket use as there are too many others here to compete. The issue in my eyes is that not many have the tires we need 120/60-13 and 130/60-13. The guy I spoke with was super helpful and suggested the following site to me: www.partsforscooters.com
In looking at this site I found the following available as a matched set for our bike by the maker "Duro". I have no idea if these are good quality or not.
http://www.partsforscooters.com/154-234 ... ory=157161
http://www.partsforscooters.com/154-239 ... ory=157161
-
- Member
- Posts: 240
- Joined: Thu Apr 03, 2014 11:56 pm
- Location: Oakland, CA
Partsforscooters was the first place I looked for the tires, which came up with the Duros. Amazon also lists the Duros (at a lot higher price), and also lists Maxxis - https://www.amazon.com/MAXXIS-60-13-M60 ... 20%2F60-13
Genuine relies on it's dealer network as the front-line. They do not deal directly with customers typically. That's not a rare thing, it's the dealership model they have chosen.
I'll admit, I have the bonus of working for a Genuine Dealership, so I am in contact with them on a very regular basis about a wide variety of items ranging from parts to strange service questions. In my experience, they have been extremely helpful. I'd be happy to contact them about this if you'd like?
Genuine relies on it's dealer network as the front-line. They do not deal directly with customers typically. That's not a rare thing, it's the dealership model they have chosen.
I'll admit, I have the bonus of working for a Genuine Dealership, so I am in contact with them on a very regular basis about a wide variety of items ranging from parts to strange service questions. In my experience, they have been extremely helpful. I'd be happy to contact them about this if you'd like?
-
- Member
- Posts: 277
- Joined: Fri Jul 03, 2009 6:59 pm
- Location: Atlanta, GA
Since you work for a dealer I am sure you a lot more ability to contact Genuine. As a customer I have none. It is funny the Maxxis tire came up on Amazon as I tried looking several times over the past few months and it never came up for me. That price($116) is about twice what they typically go for. I paid much less for the 130/60-13 Michelin PowerPure SC my dealer installed.Yalzin wrote:Partsforscooters was the first place I looked for the tires, which came up with the Duros. Amazon also lists the Duros (at a lot higher price), and also lists Maxxis - https://www.amazon.com/MAXXIS-60-13-M60 ... 20%2F60-13
Genuine relies on it's dealer network as the front-line. They do not deal directly with customers typically. That's not a rare thing, it's the dealership model they have chosen.
I'll admit, I have the bonus of working for a Genuine Dealership, so I am in contact with them on a very regular basis about a wide variety of items ranging from parts to strange service questions. In my experience, they have been extremely helpful. I'd be happy to contact them about this if you'd like?
I would actually love for you to contact Genuine and ask if they would consider stocking the Maxxis tires. I certainly think dealers would buy them if they were available. I know I always ask mine if they can get me a Maxxis tire.
-
- Member
- Posts: 367
- Joined: Wed Dec 30, 2015 5:43 am
- Location: College Station, TX
I doubt that that the average Genuine dealers would stock tires for the Blur based on how few really seem to be out there in the wild. If I was a dealer, I would definitely have some Buddy tires available at all times, and maybe some Roughhouse tires but always having a set of Blur tires seems like a waste of money and shelf space to me. I would assume that dealers could get the correct size if they really dug around for them, maybe not in the brand you want but in the size you need. I worked in a independent scooter repair shop and parts on hand, particularly tires, we're all about common, most used sizes since we could generally get odd sizes within a day or two from our primary distributor, WPS, when needed. Ultimately, a dealer would stock your tire size if they felt it made them money to do so.chickdr wrote:Since you work for a dealer I am sure you a lot more ability to contact Genuine. As a customer I have none. It is funny the Maxxis tire came up on Amazon as I tried looking several times over the past few months and it never came up for me. That price($116) is about twice what they typically go for. I paid much less for the 130/60-13 Michelin PowerPure SC my dealer installed.Yalzin wrote:Partsforscooters was the first place I looked for the tires, which came up with the Duros. Amazon also lists the Duros (at a lot higher price), and also lists Maxxis - https://www.amazon.com/MAXXIS-60-13-M60 ... 20%2F60-13
Genuine relies on it's dealer network as the front-line. They do not deal directly with customers typically. That's not a rare thing, it's the dealership model they have chosen.
I'll admit, I have the bonus of working for a Genuine Dealership, so I am in contact with them on a very regular basis about a wide variety of items ranging from parts to strange service questions. In my experience, they have been extremely helpful. I'd be happy to contact them about this if you'd like?
I would actually love for you to contact Genuine and ask if they would consider stocking the Maxxis tires. I certainly think dealers would buy them if they were available. I know I always ask mine if they can get me a Maxxis tire.
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
I bought my Michelin Sport Pilot tires (130/60-13 front, 140/60-13 rear) from www.bikebandit.com and couldn't be happier. Unfortunately, Michelin no longer offers those sizes in the Sport Pilots. People have used 120/70-13 and 130/70-13 on their Blur without issue, so when the time comes for replacement, I may try 70 series tires (of which there is a pretty good selection) which because of their taller profile, should give a slightly greater top speed and maybe a little more accurate speedo reading, at the expense of a slightly skewed odometer reading. I'll probably stay with the sizes I'm currently running, just in a 70 series profile.
Some people can break a crowbar in a sandbox.
-
- Member
- Posts: 22
- Joined: Fri Oct 18, 2013 2:43 am
- Location: Redwood City, Ca
Update. I found a local shop that will replace the tire. BTW, Cycle Gear's machine won't work on 13 inch wheels. I ended up ordering the Kendra 130/60-13 from Amazon. Should arrive next week.
Removing the rear wheel was actually pretty straightforward. I found a power point on these forums explaining how to do it. Must have been an older model, as there were small difference, but it was pretty easy. Only required one trip to the hardware store (needed to get a 1/2 drive ratchet and a 24 mm socket for the wheel nut). I didn't pull the brake disk off the wheel, as I don't have hex driver set. I hope the shop can change the tire as is.
Will let you know how easy it is to get back together in another week.
Cheers, and enjoy the long weekend!
Removing the rear wheel was actually pretty straightforward. I found a power point on these forums explaining how to do it. Must have been an older model, as there were small difference, but it was pretty easy. Only required one trip to the hardware store (needed to get a 1/2 drive ratchet and a 24 mm socket for the wheel nut). I didn't pull the brake disk off the wheel, as I don't have hex driver set. I hope the shop can change the tire as is.
Will let you know how easy it is to get back together in another week.
Cheers, and enjoy the long weekend!
- Dooglas
- Moderator
- Posts: 4368
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
I have had great success with the Power Pure on my Aprilia. I'd say that is an excellent choice. I have had some experience with both the Maxxi and the Duro in the past. I do not consider either of them to be a first quality tire.chickdr wrote:My dealer installed the Michelin Power Pure. It seems good so far.
-
- Member
- Posts: 22
- Joined: Fri Oct 18, 2013 2:43 am
- Location: Redwood City, Ca