Spare parts
Moderator: Modern Buddy Staff
- itcardoc
- Member
- Posts: 67
- Joined: Thu Oct 18, 2007 12:56 am
- Location: Ambler,Pa.
Spare parts
Lets see 1st you can't get the right size Maxxis or any other brand front 120/60x13 tire anywhere on the planet. 2nd, you can't get the proper size belt 812 20 28 9.5 anywhere (custom made for PGO????). Now how about paper element air filters and brake pads?? What gives?? -Kevin
If anything can go wrong ... it will!
- charlie55
- Member
- Posts: 1924
- Joined: Tue Apr 08, 2008 6:47 pm
- Location: New Jersey
All:
I feel kinda responsible for all of this spare parts controversy (via the thread I started on belt availability), and I'm sorry if I gave the wrong impression.
For the most part, I was only asking a hypothetical based upon the apparent non-availability of the belt from a 3rd-party supplier. As I later found out (directly from Genuine) the part is stocked and should be available. I posted a message to that effect in that thread.
Once again, sorry if I gave anyone the jitters.
One question that I still have, however, is how much wiggle room is there with belts in terms of circumference, top width, and side angle. Would a couple of mils more make a big difference, and what would be the effect of a couple of degrees more or less?
Regards,
Charlie
I feel kinda responsible for all of this spare parts controversy (via the thread I started on belt availability), and I'm sorry if I gave the wrong impression.
For the most part, I was only asking a hypothetical based upon the apparent non-availability of the belt from a 3rd-party supplier. As I later found out (directly from Genuine) the part is stocked and should be available. I posted a message to that effect in that thread.
Once again, sorry if I gave anyone the jitters.
One question that I still have, however, is how much wiggle room is there with belts in terms of circumference, top width, and side angle. Would a couple of mils more make a big difference, and what would be the effect of a couple of degrees more or less?
Regards,
Charlie
-
- Member
- Posts: 15
- Joined: Sun Jul 01, 2007 7:49 pm
- Location: indiana, pa
All i know is that i just ordered a new belt from Pride of Cleveland Scooters. I was told that all parts are available for the Blur. I was also told that the Blur would be imported every other year due to low demand. Thats a good thing and means we should be able to feel comfortable about the parts supply!!!