Page 1 of 1

FATTY RATTY...I call her CATTYWAMPUS

Posted: Thu Sep 29, 2011 3:50 am
by proonzee
Hello everyone. :D. I've had my Rattler for a few months now and never intended on doing any real modifications. I also own a honda ruckus with some mods done to it and decided I should show my rattler a little love. Here are a few pics. Let me know what u guys and gals think. A couple pics of my ruck too... Image. Image Image Image Image Image Image

Posted: Thu Sep 29, 2011 4:31 am
by bigbropgo
8)

Posted: Thu Sep 29, 2011 2:15 pm
by Lotrat
That thing looks pretty awesome. How's the 2T doing with that big tire?

Posted: Thu Sep 29, 2011 9:42 pm
by proonzee
Lotrat wrote:That thing looks pretty awesome. How's the 2T doing with that big tire?
. Thanks for the compliment :D. Take off might be a little slower but I gained 1 or 2 mph with the tire being taller.

Posted: Thu Sep 29, 2011 10:05 pm
by proonzee
I just got a koso kickstarter from a buddy that has a ruckus. Flipped it around and it fits perfect. I like this kickstarter because it spins as the wind hits it :D. Image. Here r a few close up pics of my other parts... crg mirror and polished factory levers. Image rrgs remote reservoir adjustable shock from honda ruckus Image killer scooter gy6 engine mount for honda ruckus. Image prima pipe/polished silencer/ 12x7 4+3 offset 110 pattern douglas wheel/225-35-twelve Image killer scooter/btx metal fab Zuma 125 footrest/pegs. Image

Posted: Fri Sep 30, 2011 3:43 am
by bigbropgo
Sick sick sick :clap: look tight

Posted: Mon Oct 03, 2011 10:45 pm
by proonzee
new front wheel and rotor....new paint job should be done in a few days Image Image

Posted: Tue Oct 04, 2011 3:07 am
by bigbropgo
stock front forks? how hard was it to cut and how much. i wanna do some of these mods. or truthfully, straight up rip of the ideas. :D looks pretty sweet.

Posted: Tue Oct 04, 2011 10:21 am
by proonzee
Yes stock front forks. Real easy to pull out the springs. First time I cut them I took 7 coils off the top from each spring and still rode really well. I cut 4 more on each side to get it to sit the way it does now. Its rides pretty rough now.

Posted: Thu Oct 06, 2011 3:36 am
by 21blackjack21
:D :D

Posted: Sat Oct 08, 2011 9:31 pm
by xTomBx
WOW!
I just got a Stella, but sorta wanted a Ruck...
If I had seen this, I might have went with a rattler!
Great work! Ill be watching this one!

Posted: Sun Oct 09, 2011 6:05 am
by proonzee
New paint done by A&B restoration in Temple City Ca. PPG Hot Hues Molten Bronze. Floor board covered with aluminum diamond plate. Re-wrapped the seat with diamond stitch. Wrapped a few of the plastics in carbon look vinyl. Image

Posted: Sun Oct 09, 2011 7:04 pm
by bigbropgo
:shock: amazing. Most modified rat I've seen. Nice work.

Posted: Wed Oct 12, 2011 3:30 pm
by Mybuddy09
love the new color.

Posted: Mon Oct 17, 2011 3:32 am
by Ruckus
Goot yob pronzeeeeeeeeee. I lub dee attention to detail...

Looks KILLER...lol sorry I had to....haha

Posted: Mon Oct 17, 2011 5:21 am
by bigbropgo
^Naw man, look tight.

Posted: Mon Oct 17, 2011 11:14 am
by jasondavis48108
That has to be the best modded ruff I've seen. Really well done :clap:

new folding pegs!

Posted: Wed Oct 26, 2011 5:34 am
by proonzee
Here is a picture of the folding pegs I had welded on. Image Image

Posted: Wed Oct 26, 2011 7:25 pm
by BuddyJ
Love it! What'd you do to get the stretch? It looks great.

Posted: Thu Oct 27, 2011 5:11 am
by proonzee
BuddyJ wrote:Love it! What'd you do to get the stretch? It looks great.
. Killer Scooter gy6 mount for Honda Ruckus/ modified....

Posted: Fri Oct 28, 2011 6:58 pm
by viney266
Nice job on adding the footpegs ...Great lookin ride!

new exhaust set-up!!!

Posted: Wed Nov 02, 2011 6:30 am
by proonzee
Fabrication done by Gearguy of Gearheinz Power Service in Duarte Ca. Thanks buddy! Image Image Image Polishing done by Lucero's Polish and Repair in So. El Monte Ca.

Posted: Thu Feb 09, 2012 6:53 pm
by SuperCyclone.81
How much CF wrap did you need to cover the plastics you covered?

Posted: Wed Feb 15, 2012 6:49 pm
by guam_rattler
really interested in knowing how u used the gy6 mount...how much modification was needed?

Posted: Fri Feb 17, 2012 9:40 am
by proonzee
Killer scooter gy6 mount for honda ruckus.....reversed

Posted: Sun Feb 19, 2012 2:42 am
by guam_rattler
proonzee wrote:Killer scooter gy6 mount for honda ruckus.....reversed
thanx

Posted: Tue Feb 21, 2012 3:15 am
by RoadRambler
WOW, ALL. the stages looked fantastic but love the bronze color. Fabulous!

Posted: Sun Mar 11, 2012 3:17 am
by batgirl101
seriously awesome :clap:

Posted: Thu Mar 15, 2012 12:17 pm
by JHScoot
for never "seriously intending to do any modding" you sure got some done!

great little scoot

is this the right part?

Posted: Sat Sep 01, 2012 2:18 am
by alusthhedush

Posted: Sun Sep 02, 2012 12:06 am
by bigbropgo
$500 ? ^

Posted: Tue Sep 04, 2012 3:16 pm
by alusthhedush
^not necessarily...i was just trying to see if this is the right part or not

Posted: Tue Sep 04, 2012 7:35 pm
by spr0k3t
yup... that should be the right part.

Posted: Tue Sep 04, 2012 10:15 pm
by alusthhedush
thanks!!

Love it!

Posted: Thu May 08, 2014 6:31 pm
by buddyz
This is sweet. Very nice work!

This is the inspiration I needed for some Roughhouse mods I've been considering.

New member

Posted: Wed Jun 05, 2019 4:44 am
by davidhutchins09
Hi guys, just joined this forum after a month or so of reading posts in here. Is this still pretty active?

I bought a 2016 Roughhouse R50 for $300 about a month and a half ago, and im loving it. I got it running and in perfect shape, added a Yasumi Z pipe, 90 jet, and 6g roller weights. My near future plans for the scoot is a 70cc kit, new tires, and transmission upgrades. Later, I am thinking about lowering it and possibly figuring out a stretch.

Posted: Wed Jun 05, 2019 1:31 pm
by Stanza
It is active, but you'd be better served by starting your own new post rather than tagging on to a thread that's been dead for 5 years.