hey fellow roughhousers, i have a question when it comes to the differences in exhaust mounts on the buddy vs. the roughhouse.
my friend just purchased one these for his Honda spree :www.treatland.tv/MLM-honda-spree-people ... pe-381.htm
i was absolutely amazed by the performance this pipe adds, so i was looking around their site and found this www.treatland.tv/MLM-genuine-buddy-50-p ... pe-381.htm
my question is will this Mount up to the rh? or will is it not compatible?
exhaust mounting.
Moderator: Modern Buddy Staff
- theemptythrone
- Member
- Posts: 234
- Joined: Wed Feb 27, 2013 1:48 am
- Location: Spokane,WA
exhaust mounting.
scoots greazy v MCgilacuddy.
- agrogod
- Member
- Posts: 1156
- Joined: Mon Jul 19, 2010 9:29 pm
- Location: Rancho Cordova, CA
Many parts are interchangeable between the Buddy 50 and the RH since they share the same engine. Looking at the photos provided on the site, the mount looks similar to the RH. The mount holes for the RH are 8.75 mm or about 3 1/2 inches apart. But the bend at the exhaust port mount doesn't look quite right. Its not impossible to have this bent to fit, but at a little over $200 its just another added expense if it doesn't mate up.
"When your mouth is yapping your arms stop flapping, get to work" - a quote from my father R.I.P..
always start with the simple, it may end up costing you little to nothing
always start with the simple, it may end up costing you little to nothing