Roughhouse 50 to 150? 200?

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
eedo17
Member
Posts: 18
Joined: Mon Mar 12, 2018 12:50 am
Location: Chicago

Roughhouse 50 to 150? 200?

Post by eedo17 »

I currently have a 50 with BBK, exhaust, super trans, and intake...is it in any way possible to swap out the 50cc with a 150 or larger while STILL utilizing the BBK and super trans?
Not worried about the exhaust or intake.

I wouldn’t be doing this on my own. I just need to know this isn’t s dumb question before asking them!
User avatar
Stanza
Member
Posts: 570
Joined: Mon Jan 29, 2018 8:34 pm
Location: Chicago

Post by Stanza »

Which 150 did you have in mind? Going from a two stroke to a four stroke (thinking of the typical buddy 150 or GY6 150, you'd pretty much need to swap over the whole case, as nothing you have in there currently would be cross compatible.

Also, sorry if this is a dumb question, BBK refers to big bore kit? soooooo, if you have a kit on your 50cc (I'm assuming either 68cc or 72cc), and you want to go to a 150, why would you want to keep using the kit? Wouldn't that just make it a smaller displacement again?
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

Post by OBX Dan »

That engine swap would be too much work. Just buy a 150.

The Rattler 110 had a BBK that made it around 130cc. Maybe look into that. It's the same frame I think.
Post Reply