What gasket for Roughhouse exhaust?

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

What gasket for Roughhouse exhaust?

Post by OBX Dan »

And where can I get a stock exhaust for the little beast?
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

Post by OBX Dan »

Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
Feral_Sparky
Member
Posts: 47
Joined: Wed Feb 02, 2011 4:54 pm

Post by Feral_Sparky »

OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
http://www.scooterloungeonline.com/prod ... FFLER%20BC
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

Post by OBX Dan »

Feral_Sparky wrote:
OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
http://www.scooterloungeonline.com/prod ... FFLER%20BC

Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?
User avatar
Stanza
Member
Posts: 570
Joined: Mon Jan 29, 2018 8:34 pm
Location: Chicago

Post by Stanza »

Those tend to cost a fortune, since they have the built in catalytic converter. Not to discourage you, of course, but don't fall over when you hear the price on a new one. Might want to look into aftermarket, if all else fails.
Feral_Sparky
Member
Posts: 47
Joined: Wed Feb 02, 2011 4:54 pm

Post by Feral_Sparky »

OBX Dan wrote:
Feral_Sparky wrote:
OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
http://www.scooterloungeonline.com/prod ... FFLER%20BC

Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?
Stock exhausts are around $400-450 and available on that site.
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

Post by OBX Dan »

Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?
Feral_Sparky
Member
Posts: 47
Joined: Wed Feb 02, 2011 4:54 pm

Post by Feral_Sparky »

OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?
If you want stock but better get the sport exhaust.
https://www.amazon.com/Performance-Exha ... B015ONNLOE
User avatar
OBX Dan
Member
Posts: 66
Joined: Sat May 11, 2019 4:17 pm
Location: Outer Banks, N.C.

Post by OBX Dan »

Feral_Sparky wrote:
OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?
If you want stock but better get the sport exhaust.
https://www.amazon.com/Performance-Exha ... B015ONNLOE
I actually got this one. Any idea what to jet it? 90?

https://www.scooterworks.com/Prima-Perf ... P8747.aspx
Post Reply