Modern Buddy

Posted: **Sat Jun 22, 2019 6:46 am**

And where can I get a stock exhaust for the little beast?

Posted: **Sun Jun 23, 2019 7:55 am**

Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?

Posted: **Wed Jun 26, 2019 10:51 pm**

OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?

http://www.scooterloungeonline.com/prod ... FFLER%20BC

Posted: **Thu Jun 27, 2019 5:15 am**

Feral_Sparky wrote:
OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
http://www.scooterloungeonline.com/prod ... FFLER%20BC

Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?

Posted: **Thu Jun 27, 2019 1:23 pm**

Those tend to cost a fortune, since they have the built in catalytic converter. Not to discourage you, of course, but don't fall over when you hear the price on a new one. Might want to look into aftermarket, if all else fails.

Posted: **Thu Jun 27, 2019 1:52 pm**

OBX Dan wrote:
Feral_Sparky wrote:
OBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
http://www.scooterloungeonline.com/prod ... FFLER%20BC

Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?

Stock exhausts are around $400-450 and available on that site.

Posted: **Sat Jun 29, 2019 3:46 am**

Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?

Posted: **Sat Jun 29, 2019 12:24 pm**

OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?

If you want stock but better get the sport exhaust.
https://www.amazon.com/Performance-Exha ... B015ONNLOE

Posted: **Thu Jul 04, 2019 3:06 am**

Feral_Sparky wrote:
OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Can anyone suggest a size to re-jet? 90?
If you want stock but better get the sport exhaust.
https://www.amazon.com/Performance-Exha ... B015ONNLOE

I actually got this one. Any idea what to jet it? 90?

https://www.scooterworks.com/Prima-Perf ... P8747.aspx

Modern Buddy

What gasket for Roughhouse exhaust?

What gasket for Roughhouse exhaust?