Modern Buddy

Hi everyone!

I have a 2018 Roughhouse 50, No spark issue. I narrowed it down to the cdi area. I noticed that it was wired wrong. I spotted the green and black wire where the spark plug should be. I think I figured it out but just want to make sure that I didn't remuck things up.

[1]BLUE/WHITE(pick up coil) [2]BLANK [3]RED(Spark plug)
[4]BLACK (Ground) [5]Empty [6]RED/BLACK

GREEN/BLACK not used.

Is this the correct layout you see on your RH50s?

Figured it out on my own. Plugged the pickup coil directly into pin 1. The Blue and white wire that was plugged in, was not my pickup coil wire.



---CDI 5 PINS ---
[1]PICK UP COIL [2] BLANK [3} SPARK PLUG
[4]GROUND [5]NOT NEEDED/ENGINE CUT OFF [6]EXCITER COIL WIRE