ROUGHHOUSE 50 CDI PIN LAYOUT

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
Hpex86
Member
Posts: 2
Joined: Mon Mar 21, 2022 3:00 pm

ROUGHHOUSE 50 CDI PIN LAYOUT

Post by Hpex86 »

Hi everyone!

I have a 2018 Roughhouse 50, No spark issue. I narrowed it down to the cdi area. I noticed that it was wired wrong. I spotted the green and black wire where the spark plug should be. I think I figured it out but just want to make sure that I didn't remuck things up.

[1]BLUE/WHITE(pick up coil) [2]BLANK [3]RED(Spark plug)
[4]BLACK (Ground) [5]Empty [6]RED/BLACK

GREEN/BLACK not used.

Is this the correct layout you see on your RH50s?
Hpex86
Member
Posts: 2
Joined: Mon Mar 21, 2022 3:00 pm

Re: ROUGHHOUSE 50 CDI PIN LAYOUT

Post by Hpex86 »

Figured it out on my own. Plugged the pickup coil directly into pin 1. The Blue and white wire that was plugged in, was not my pickup coil wire.



---CDI 5 PINS ---
[1]PICK UP COIL [2] BLANK [3} SPARK PLUG
[4]GROUND [5]NOT NEEDED/ENGINE CUT OFF [6]EXCITER COIL WIRE
Post Reply