Stella with some non-vintage mods
Posted: Mon Apr 02, 2012 9:42 pm
I was going to keep my Stella looking vintage, but then decided "hell with it." Here's what I've done so far:
- Added a black kickstand from Scooterworks for times when I need to only hop off for a second.
- Added a rear rack. It turns out this 2-stroke-only rack will work on the 4-stroke Stella, if you disassemble half the emissions tubing and wiring, install a taller seat post, remove the entire seat, and hit the front part of the rack a lot with a big rubber mallet.
- Attached the Seahorse 540 case from my previous scooter onto the new rack, including some work with silicone tub sealant to make sure the bolt holes are completely waterproof.
- Drilled the top of the Seahorse box in order to add a Rotopax lockable mounting plate for a 1-gallon Rotopax gas can. I bought one can and two mounting kits, so I can switch the gas can between my scooter and my motorcycle. 1 gallon of spare fuel on the Stella is going to stretch a long way!
- Peeled off the side reflectors, since they were slowly falling off on their own.