Lifting a buddy into a truck or SUV
Moderator: Modern Buddy Staff
- mshaw09
- Member
- Posts: 35
- Joined: Wed Jan 28, 2009 7:16 am
- Location: Boise, Idaho
Lifting a buddy into a truck or SUV
This summer I will need to lift my scooter into a truck or SUV. I don't have any other way to transport my scooter. I realize most people use a trailer or just ride the scooter but neither will be available to me. (It's a long story trust me). Do any of you have experience lifting a scooter in this manner? What is the weight of a buddy 125? Any ideas or info would be much appreciated.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Buddy 125 weighs just under 225lbs. dry (with no gas or other fluids in it).
Any reason you can't use a ramp?
Something like this is probably one of the better options for a decent price. It's a much safer option than lifting in and out, definitely worth the $55 in saved time, convenience and potential damage.
Any reason you can't use a ramp?
Something like this is probably one of the better options for a decent price. It's a much safer option than lifting in and out, definitely worth the $55 in saved time, convenience and potential damage.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- Lostmycage
- FAQ Moderator
- Posts: 4062
- Joined: Tue Jun 17, 2008 3:36 am
- Location: The Interwebz!
Here's some good info in transporting your scoot. It'll be easily accessible in the new FAQ section.... Coming Soon!
Check out Scoot Richmond's new site: My awesome local shop.
- Cheshire
- Member
- Posts: 1976
- Joined: Sat Jun 28, 2008 5:27 pm
- Location: near Asheville, NC
-
- Member
- Posts: 580
- Joined: Wed Nov 12, 2008 7:06 pm
- Location: San Diego, CA
Lowe's has ramps in the store for about $60.
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Last edited by Angela on Fri Apr 17, 2009 2:31 pm, edited 1 time in total.
- JettaKnight
- Member
- Posts: 671
- Joined: Thu Mar 29, 2007 2:19 am
- Location: Fort Wayne
- DIPA
- Member
- Posts: 118
- Joined: Wed Nov 19, 2008 5:53 pm
- Location: Philly
I have a pickup truck, and I get the Buddy into the truck bed with me & two other people. Two people grab the front wheel of the scoot (grab the hubs...is that the right word?) and lift it into the truck bed. The 3rd person stands in the truck bed, holding the handlebars steady so the wheel stays straight.
Then, the two people grab the back wheel & do the same thing. The 3rd person stays in the truck bed, guiding the front wheel. I'm a small girl & did this with two other female friends. Easier if big guys are around though
I use 4 tie-downs to secure the Buddy; one from each handlebar, & one from each side in the back. Helps if you have a rear rack to secure it to.
Then, the two people grab the back wheel & do the same thing. The 3rd person stays in the truck bed, guiding the front wheel. I'm a small girl & did this with two other female friends. Easier if big guys are around though
I use 4 tie-downs to secure the Buddy; one from each handlebar, & one from each side in the back. Helps if you have a rear rack to secure it to.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
That's a good one for that price! It makes loading the scooter a 1-person job.Angela wrote:Lowe's has ramps in the store for about $60.
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
-
- Member
- Posts: 580
- Joined: Wed Nov 12, 2008 7:06 pm
- Location: San Diego, CA
You may see me using it at AmeriVespa.ericalm wrote:That's a good one for that price! It makes loading the scooter a 1-person job.Angela wrote:Lowe's has ramps in the store for about $60.
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Personally, I think every scooter rider and truck/suv owner should have one in case of an emergency situation.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
That's what roadside assistance is for!Angela wrote:You may see me using it at AmeriVespa.ericalm wrote:That's a good one for that price! It makes loading the scooter a 1-person job.Angela wrote:Lowe's has ramps in the store for about $60.
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Personally, I think every scooter rider and truck/suv owner should have one in case of an emergency situation.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
-
- Member
- Posts: 186
- Joined: Sat May 31, 2008 6:53 pm
- Location: Hinckley, Ohio (Cleveland)
-
- Member
- Posts: 580
- Joined: Wed Nov 12, 2008 7:06 pm
- Location: San Diego, CA
i've done it and i'm a little wee person (can't put my feet on the ground while sitting on my buddy).schroeder wrote:not sure best way to use the ramp such as the one from Lowe's. If you are by yourself, do you try to ride it onto the bed or push it up. Seems some truck beds will make it a rather steep climb.
i pushed. its not easy though. i would suggest 2 people.
- Scooter Hoot
- Member
- Posts: 267
- Joined: Wed Jul 16, 2008 2:17 pm
- Location: Houston
Never done a scooter precisely, but for some other large and awkwardly shaped and weighted items, we actually just rolled them to the loading dock of the dorm which had a ramp to the top. Once we were up there, it was easier to lower it down the 6 or 8 inch drop to the truck bed then it was to lift it up 2 or 3 feet.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Pushing is the way to go!schroeder wrote:not sure best way to use the ramp such as the one from Lowe's. If you are by yourself, do you try to ride it onto the bed or push it up. Seems some truck beds will make it a rather steep climb.
Best way to do it is back the truck up to the edge of a driveway or curb. That lessens the incline.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
-
- Member
- Posts: 421
- Joined: Tue May 27, 2008 8:09 pm
- Location: Western, Ky
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
ZQ8 Blazer wrote:I got this thing from my dealer that goes on the handle bars and has tie downs on each side, secures it very well.
Canyon Dancer?
On sale for $30 at Motorsport!
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- KRUSTYburger
- Member
- Posts: 3366
- Joined: Sun Feb 10, 2008 1:54 am
- Location: Pee-Cola, FL
Alright, reppin' LOWE'S!!! Anybody want to go halfsies with me on the ramp, I only need one...ericalm wrote:That's a good one for that price! It makes loading the scooter a 1-person job.Angela wrote:Lowe's has ramps in the store for about $60.
I found it online
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Syd wrote:Use the second one to walk on.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
-
- Member
- Posts: 421
- Joined: Tue May 27, 2008 8:09 pm
- Location: Western, Ky
Yep that's them, they're extremely handy.ericalm wrote: Canyon Dancer?
On sale for $30 at Motorsport!
-Justin-
- KRUSTYburger
- Member
- Posts: 3366
- Joined: Sun Feb 10, 2008 1:54 am
- Location: Pee-Cola, FL
- ScooterTrash
- Member
- Posts: 2007
- Joined: Sun Jun 03, 2007 5:00 pm
- Location: Idaho Falls, ID
This is how we do it at our shop, we have a VERY big dip in our driveway so the tailgate is close to the ground.ericalm wrote:Pushing is the way to go!schroeder wrote:not sure best way to use the ramp such as the one from Lowe's. If you are by yourself, do you try to ride it onto the bed or push it up. Seems some truck beds will make it a rather steep climb.
Best way to do it is back the truck up to the edge of a driveway or curb. That lessens the incline.
Option 2, put the truck on airbags and lower it
- Syd
- Member
- Posts: 4686
- Joined: Wed Jul 18, 2007 6:41 am
- Location: Tempe
- Cheshire
- Member
- Posts: 1976
- Joined: Sat Jun 28, 2008 5:27 pm
- Location: near Asheville, NC
-
- Member
- Posts: 421
- Joined: Tue May 27, 2008 8:09 pm
- Location: Western, Ky
- msdallas2008
- Member
- Posts: 35
- Joined: Mon Sep 15, 2008 12:50 am
- Location: Dallas
When I was getting ready to bring Betsy home once she was prepped, I bought some of the make a ramp with a piece of wood things. I used a 2x8 treated. Damn thing broke in the middle as I was rolling her out of the truck. Went out & bought a ramp the next day at Northern Tool.
Took the broken 2x8 back to Home Depot & asked got a refund.
Scooter was OK.
Took the broken 2x8 back to Home Depot & asked got a refund.
Scooter was OK.
- Cheshire
- Member
- Posts: 1976
- Joined: Sat Jun 28, 2008 5:27 pm
- Location: near Asheville, NC
What length of lumber were you using?msdallas2008 wrote:When I was getting ready to bring Betsy home once she was prepped, I bought some of the make a ramp with a piece of wood things. I used a 2x8 treated. Damn thing broke in the middle as I was rolling her out of the truck. Went out & bought a ramp the next day at Northern Tool.
Took the broken 2x8 back to Home Depot & asked got a refund.
Scooter was OK.
- msdallas2008
- Member
- Posts: 35
- Joined: Mon Sep 15, 2008 12:50 am
- Location: Dallas
-
- Member
- Posts: 580
- Joined: Wed Nov 12, 2008 7:06 pm
- Location: San Diego, CA
- mshaw09
- Member
- Posts: 35
- Joined: Wed Jan 28, 2009 7:16 am
- Location: Boise, Idaho
- pajeanka
- Member
- Posts: 74
- Joined: Sat Dec 01, 2007 12:20 pm
- Location: Fargo, ND
Hubby just picked up our new 2008 Buddy Saint Tropez at Green Tree Scooters in Mason City, IA today. He loaded it in the back of our Plymouth Grand Voyager minivan very easily with this ramp we recently purchased: http://discountramps.com/motocross-ramp.htm (model # AFP-9012)
(All but front seats out of van; mirrors removed on scooter.) He was very excited about how easy it was to one person load the scooter with this ramp. Especially compared to picking up his 2008 Blur in Chicago last summer and three guys lifting that scooter into the same minivan (i.e. struggle, grunt, sore back) and unloading was worse.
The ramp is well made, light weight, and wider than most of the ramps in this price range (yeap, I did my homework). Shipping was very quick from this company.
I assume unloading the new scooter tomorrow night will also be a breeze as well. So for the moment we are a 3 scooter family, but one of them is For Sale soon, which makes having a ramp to transport these 2 wheelers for whatever reason almost as good of an investment as a Battery Tender.
(All but front seats out of van; mirrors removed on scooter.) He was very excited about how easy it was to one person load the scooter with this ramp. Especially compared to picking up his 2008 Blur in Chicago last summer and three guys lifting that scooter into the same minivan (i.e. struggle, grunt, sore back) and unloading was worse.
The ramp is well made, light weight, and wider than most of the ramps in this price range (yeap, I did my homework). Shipping was very quick from this company.
I assume unloading the new scooter tomorrow night will also be a breeze as well. So for the moment we are a 3 scooter family, but one of them is For Sale soon, which makes having a ramp to transport these 2 wheelers for whatever reason almost as good of an investment as a Battery Tender.
- BuddyLicious
- Member
- Posts: 724
- Joined: Sun May 11, 2008 1:29 pm
- Location: Murray,Kentucky
Honestly for your need here why not just make you a ramp from 2x8 board. All you would really need is the board a heavy duty hinge(s) and maybe some material for traction.A bit of some shingles or that tape that's used for non slipping and traction will do just fine.It would be much cheaper and last basically forever.If for some reason you arn't up to putting it together,I bet you know someone who could do it.Just a thought.
Aerosmith, None Other.
- Animaetrix00
- Member
- Posts: 115
- Joined: Sat Jan 03, 2009 2:44 am
- Location: San Diego, CA
I did this for the first time on Sunday. We used a ramp on the way up, then just straight lifted it later in the day (2 people needed, 3 better.) It was pretty easy.
I should've read the tie-down stuff first, though, poor thing toppled twice in the bed of the truck in the first block before we got it sorted out. ;/
I should've read the tie-down stuff first, though, poor thing toppled twice in the bed of the truck in the first block before we got it sorted out. ;/
The height involved wasn't nearly as far (less than a foot vertical), but I needed something fairly durable for regular use getting my Buddy from the sidewalk to my front porch and back, so I built a little ramp out of wood. I used a 1x12* board with additional pieces of the appropriate size attached at various points to support it (e.g. a 2x4* at the spot where it was 3.5" from the ground, a 2x6* at about 5.5"). Cost me nearly ten bucks.
*For those unfamiliar with lumber standards, a "two by four" is not actually 2" by 4", but only 1.5" by 3.5". Other "named" board dimensions are similarly inflated. Plan accordingly.
*For those unfamiliar with lumber standards, a "two by four" is not actually 2" by 4", but only 1.5" by 3.5". Other "named" board dimensions are similarly inflated. Plan accordingly.
- msdallas2008
- Member
- Posts: 35
- Joined: Mon Sep 15, 2008 12:50 am
- Location: Dallas
Sorry, I misread your question. I believe it was an 8' piece.Cheshire wrote:What length of lumber were you using?msdallas2008 wrote:When I was getting ready to bring Betsy home once she was prepped, I bought some of the make a ramp with a piece of wood things. I used a 2x8 treated. Damn thing broke in the middle as I was rolling her out of the truck. Went out & bought a ramp the next day at Northern Tool.
Took the broken 2x8 back to Home Depot & asked got a refund.
Scooter was OK.
- KRUSTYburger
- Member
- Posts: 3366
- Joined: Sun Feb 10, 2008 1:54 am
- Location: Pee-Cola, FL
If it's close, don't forget you can deflate your front tire to get that extra inch or so off the height.mshaw09 wrote:I have an 02 Jeep Grand Cherokee and I'm gonna try and find a loading dock that is close in height to the back of the Jeep and see if I can just roll it in. I'm hoping that with the mirrors off it will fit inside without having to tip it sideways.
- mshaw09
- Member
- Posts: 35
- Joined: Wed Jan 28, 2009 7:16 am
- Location: Boise, Idaho
You have probably saved me hours worth of effort trying to make it fit with such a simple and excellent idea.KRUSTYburger wrote:If it's close, don't forget you can deflate your front tire to get that extra inch or so off the height.mshaw09 wrote:I have an 02 Jeep Grand Cherokee and I'm gonna try and find a loading dock that is close in height to the back of the Jeep and see if I can just roll it in. I'm hoping that with the mirrors off it will fit inside without having to tip it sideways.
Thanks!
- KRUSTYburger
- Member
- Posts: 3366
- Joined: Sun Feb 10, 2008 1:54 am
- Location: Pee-Cola, FL
- BeachBuzz
- Member
- Posts: 457
- Joined: Wed May 28, 2008 12:37 am
- Location: Delaware
this method works great. I've done it with one helper many times. grab the front by the fork legs on each side and lift the front wheel on to the tailgate or bed, reposition to the rear and lift it with the grab rails.DIPA wrote:I have a pickup truck, and I get the Buddy into the truck bed with me & two other people. Two people grab the front wheel of the scoot (grab the hubs...is that the right word?) and lift it into the truck bed. The 3rd person stands in the truck bed, holding the handlebars steady so the wheel stays straight.
Then, the two people grab the back wheel & do the same thing. The 3rd person stays in the truck bed, guiding the front wheel. I'm a small girl & did this with two other female friends. Easier if big guys are around though
I use 4 tie-downs to secure the Buddy; one from each handlebar, & one from each side in the back. Helps if you have a rear rack to secure it to.
I also have a Versa Hauler (VH50) that is rated for 250#, specifically for 50cc scoots but the Buddy is under the weight limit. We hauled the 125 from NC to DE with the VH on the back of a Dodge Magnum. You can use any vehicle with a Class II or III hitch reveiver.
when I got my Blur (150 miles away) I borrowed my daughters Caravan, folded down all the seats except the 2 front, took the mirrors off the scoot and it fit (snugly) in the back - so tight I barely needed tie-downs but I used them anyway. A naked (-mirrors & windscreen) Buddy should fit easily in a minivan.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
That's a great deal. Thanks for sharing!pajeanka wrote:Hubby just picked up our new 2008 Buddy Saint Tropez at Green Tree Scooters in Mason City, IA today. He loaded it in the back of our Plymouth Grand Voyager minivan very easily with this ramp we recently purchased: http://discountramps.com/motocross-ramp.htm (model # AFP-9012)
KRUSTYburger, FTW!mshaw09 wrote:You have probably saved me hours worth of effort trying to make it fit with such a simple and excellent idea.KRUSTYburger wrote:If it's close, don't forget you can deflate your front tire to get that extra inch or so off the height.mshaw09 wrote:I have an 02 Jeep Grand Cherokee and I'm gonna try and find a loading dock that is close in height to the back of the Jeep and see if I can just roll it in. I'm hoping that with the mirrors off it will fit inside without having to tip it sideways.
Thanks!
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…