We'll be there again in September.jasondavis48108 wrote:hey, wait a minute, I just realized that you said you were at thunderdrome, damn that's close by and I didn't get to go cause I was giving finals
Maybe next year, I'd totally love to check out Frenchy in action
Project "Frenchy" (we love gold!) 56k Beware!
Moderator: Modern Buddy Staff
- NASRA
- Member
- Posts: 72
- Joined: Fri Jun 25, 2010 7:31 pm
- Location: Indy
- Contact:
Amerivespa Indy 2015.
Scooterists start your engines!
#AVINDY15
Scooterists start your engines!
#AVINDY15
- jasondavis48108
- Member
- Posts: 2919
- Joined: Fri Apr 24, 2009 12:36 pm
- Location: Ann Arbor
right on, when I asked my dealer about using the nyc forks they told me I'd need to basically replace the front wheel as well as the fender with the wheel from a buddy125 in order to make it work. Glad to hear soemone's working on an alternativeNASRA wrote:For the record the front end I used is not the same as the 150cc Buddy's and is currently be developed by Enviromoto.com. Once we feel the product does as advertised we will release it to the tuning community.jasondavis48108 wrote:that was awesome! I didn't even realize that the NCY forks were compatible with the Buddy 50s, What a great upgrade.
"Only the curious have, if they live, a tale worth telling at all" Alastair Reid
- jasondavis48108
- Member
- Posts: 2919
- Joined: Fri Apr 24, 2009 12:36 pm
- Location: Ann Arbor
awesome, Hopefully work won't be so crazy around then. I'd love to come check it outNASRA wrote:We'll be there again in September.jasondavis48108 wrote:hey, wait a minute, I just realized that you said you were at thunderdrome, damn that's close by and I didn't get to go cause I was giving finals
Maybe next year, I'd totally love to check out Frenchy in action
"Only the curious have, if they live, a tale worth telling at all" Alastair Reid
- NASRA
- Member
- Posts: 72
- Joined: Fri Jun 25, 2010 7:31 pm
- Location: Indy
- Contact:
-
- Member
- Posts: 3
- Joined: Wed Oct 26, 2011 5:06 am
- Location: maui
-
- Member
- Posts: 3
- Joined: Wed Oct 26, 2011 5:06 am
- Location: maui
-
- Member
- Posts: 260
- Joined: Tue Jun 28, 2011 8:15 pm
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
^^^^ Sprocket specialists custom cut sprockets for us for our 70cc Tomos mopeds when we were racing those. You just have to call them with precise measurements. 72 MPH out of a Tomos ( Yeah , I"m proud of that )...and yeah its scary LOLsum-azn-kid wrote:is there up gear kits for the buddy? Since thats the one thing holding you back from getting more topend. I have modified mopeds with 70cc/carb/trans/pipe. but without gears their topend is still low. thanks
...didn't mean to thread hijack...carry on. I am enjoying this thread...
Speed is only a matter of money...How fast do you want to go?
- NASRA
- Member
- Posts: 72
- Joined: Fri Jun 25, 2010 7:31 pm
- Location: Indy
- Contact:
Hi again,
Sorry we have been away so long. Our race team has taken off and we have been super busy tuning those bikes and holding events ect.
Here is a link to the ceramic coated bridged exhaust kit.
http://www.enviromoto.ecrater.com/p/141 ... or-genuine
Here is a link to our transmission parts.
http://www.enviromoto.ecrater.com/c/129 ... ansmission
Thanks for the heads on the gears, I'll have to make a phone call.
Sorry we have been away so long. Our race team has taken off and we have been super busy tuning those bikes and holding events ect.
Here is a link to the ceramic coated bridged exhaust kit.
http://www.enviromoto.ecrater.com/p/141 ... or-genuine
Here is a link to our transmission parts.
http://www.enviromoto.ecrater.com/c/129 ... ansmission
Thanks for the heads on the gears, I'll have to make a phone call.
Amerivespa Indy 2015.
Scooterists start your engines!
#AVINDY15
Scooterists start your engines!
#AVINDY15
- ThreeSheets
- Dealer
- Posts: 153
- Joined: Fri May 18, 2012 1:32 pm
- Location: Chicago
- Contact: