My front brake seems to be sticking. The front wheels does not spin easily, it will roll when the throttle is on but if I try to spin it by hand or push the scooter, it feels like it is braking.
Anyone know how to fix this?
Thanks for any info.
Front Brake Sticking
Moderator: Modern Buddy Staff
-
- Member
- Posts: 131
- Joined: Sun Jul 08, 2007 1:06 am
- Location: Edinburg, Tx.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Is this on the P200?
It may not be your brake. My LX was having a similar problem. Turned out to be wheel bearings. I was lucky the wheel didn't seize on me. You should pull it apart and check the brakes and bearings ASAP or have a mechanic look at it.
It may not be your brake. My LX was having a similar problem. Turned out to be wheel bearings. I was lucky the wheel didn't seize on me. You should pull it apart and check the brakes and bearings ASAP or have a mechanic look at it.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
x2 for pulling it apart to check it out. If its a drum it may just be filthy and need to be cleaned. The pivot could be rusty and sticking as well. Clean it all and regrease it. And, as above, check those wheel bearings while you are there.
Speed is only a matter of money...How fast do you want to go?