Exhausts

waspmike · Post by **waspmike** » Mon Dec 12, 2011 2:34 am

Who if anyone is interested in a SS exhaust for their Blur? 150 or 220.

I may have an inside track to get some made if there is sufficient interest.

turboscott · Post by **turboscott** » Mon Dec 12, 2011 4:29 am

I would be interested if done right and proven.

omniphil · Post by **omniphil** » Mon Dec 12, 2011 2:17 pm

If it actually increased horsepower, I would want one.

If it just makes more noise, not interested.

Rippinyarn · Post by **Rippinyarn** » Mon Dec 12, 2011 3:59 pm

<raises hand> but it can't be too expensive <turns out pockets>

ScootCorps · Post by **ScootCorps** » Fri Dec 16, 2011 10:56 pm

Do you have any pics or info on what you are talking about? I am VERY interested in an exhaust, if it is either titanium/carbon (yoshimura-style), sounds right & actually enhanced performance.

inspyre5 · Post by **inspyre5** » Sun Dec 18, 2011 8:34 am

I am interested as well.

turboscott · Post by **turboscott** » Thu Dec 22, 2011 5:29 am

You guys that are worried about power do realize this is a 16HP motor so you wont get much more amazing power out of it right?

I would love a better tone...not a noise maker,
More sporty look...not offensive garage kit,
Lighter set-up....to release power to wieght ratio!
Be one of the few who have a better exhaust...cuz chicks dig it!

SevenhertZ · Post by **SevenhertZ** » Mon Jan 02, 2012 9:29 pm

I'm down for anything. This has me very excited.

ScootCorps · Post by **ScootCorps** » Wed Jan 04, 2012 6:01 pm

The OE exhaust is soooo lame. Lightweight, progressive design, high-mount, aggressive note, rebuildable would be preferred.

dorby · Post by **dorby** » Thu Jan 05, 2012 5:31 am

i build custom exhaust id be open to do some custom blur exhaust

here are the sound clips

http://www.youtube.com/user/MrDorby?feature=mhee

http://www.youtube.com/watch?v=yVgXZ7Ri ... detailpage

ScootCorps · Post by **ScootCorps** » Thu Jan 05, 2012 9:57 pm

The sound from the CF exhaust is the best I've heard come from a GY6!
And the style is exactly what I'm talking about!
How much and what's the possibility of making an "under-tail" exhaust?

waspmike · Post by **waspmike** » Fri Jan 06, 2012 6:47 am

Just an update I'm planning to visit the factory in the next two weeks. Will post as soon as I know more.

15uzu · Post by **15uzu** » Fri Jan 06, 2012 2:05 pm

While you're there.....ask them about doing a pipe for the X-Hot as well.......there is virtually nothing on the market at the moment.

waspmike · Post by **waspmike** » Thu Jan 12, 2012 9:27 am

My apologies to all. But I went to the factory and no-can-do.

The one I saw and talked to the owner about was a one-off and they don't want to do anymore.

Swordsman · Post by **Swordsman** » Fri Mar 02, 2012 2:10 pm

Okay, that green Ruckus looks incredible, but

1.) Can it turn, and

2.) How the heck does it even spin those massive wheels?

~SM

Rippinyarn · Post by **Rippinyarn** » Sun Mar 04, 2012 2:59 pm

I spoke with the Scooterworks guys at Dealer Expo and they too are unsure about even a Prima pipe for the Blur. They apparently are shy because the number of the scoots isn't big, so the 'pool' of potential buyers is already small, and then you add in a significant cost item (the cheapest of the slip-on pipes for motorcycles are close to $400), so you can see why they feel the way they do.

Our best bet is probably to look for a stock motorcycle pipe replacement via an adaptor or something that would slip on after the inspection bung.

brianwheelies · Post by **brianwheelies** » Mon Mar 05, 2012 8:19 am

What is the Blur engine based off of? I thought it was an enlarged GY6. If so, would a Buddy 125/150/170 exhaust work?

Modern Buddy

Exhausts

Exhausts

exhausts

VERY VERY INTERESTED

Blur 220 Exhaust

Dorbyworks Exhaust