The spirited black sheep of the Genuine lineup
Moderator: Modern Buddy Staff
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Thu Sep 29, 2011 3:50 am
Last edited by
proonzee on Thu Sep 29, 2011 10:09 pm, edited 1 time in total.
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Thu Sep 29, 2011 4:31 am
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
Lotrat
Member
Posts: 440 Joined: Fri Apr 29, 2011 5:35 am
Location: Vista, CA
Post
by Lotrat » Thu Sep 29, 2011 2:15 pm
That thing looks pretty awesome. How's the 2T doing with that big tire?
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Thu Sep 29, 2011 9:42 pm
Lotrat wrote: That thing looks pretty awesome. How's the 2T doing with that big tire?
. Thanks for the compliment
. Take off might be a little slower but I gained 1 or 2 mph with the tire being taller.
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Thu Sep 29, 2011 10:05 pm
I just got a koso kickstarter from a buddy that has a ruckus. Flipped it around and it fits perfect. I like this kickstarter because it spins as the wind hits it
.
. Here r a few close up pics of my other parts... crg mirror and polished factory levers.
rrgs remote reservoir adjustable shock from honda ruckus
killer scooter gy6 engine mount for honda ruckus.
prima pipe/polished silencer/ 12x7 4+3 offset 110 pattern douglas wheel/225-35-twelve
killer scooter/btx metal fab Zuma 125 footrest/pegs.
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Fri Sep 30, 2011 3:43 am
Sick sick sick
look tight
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Mon Oct 03, 2011 10:45 pm
new front wheel and rotor....new paint job should be done in a few days
BTX metal fabrication. Killer Scooter.
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Tue Oct 04, 2011 3:07 am
stock front forks? how hard was it to cut and how much. i wanna do some of these mods. or truthfully, straight up rip of the ideas.
looks pretty sweet.
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Tue Oct 04, 2011 10:21 am
Yes stock front forks. Real easy to pull out the springs. First time I cut them I took 7 coils off the top from each spring and still rode really well. I cut 4 more on each side to get it to sit the way it does now. Its rides pretty rough now.
BTX metal fabrication. Killer Scooter.
xTomBx
Member
Posts: 146 Joined: Mon Apr 11, 2011 11:59 am
Location: Portage, MI
Post
by xTomBx » Sat Oct 08, 2011 9:31 pm
WOW!
I just got a Stella, but sorta wanted a Ruck...
If I had seen this, I might have went with a rattler!
Great work! Ill be watching this one!
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Sun Oct 09, 2011 6:05 am
New paint done by A&B restoration in Temple City Ca. PPG Hot Hues Molten Bronze. Floor board covered with aluminum diamond plate. Re-wrapped the seat with diamond stitch. Wrapped a few of the plastics in carbon look vinyl.
BTX metal fabrication. Killer Scooter.
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Sun Oct 09, 2011 7:04 pm
amazing. Most modified rat I've seen. Nice work.
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
Mybuddy09
Member
Posts: 3 Joined: Tue Oct 11, 2011 3:25 am
Location: orange co
Post
by Mybuddy09 » Wed Oct 12, 2011 3:30 pm
love the new color.
Ruckus
Member
Posts: 1 Joined: Thu Apr 02, 2009 10:47 pm
Location: Los Angeles
Post
by Ruckus » Mon Oct 17, 2011 3:32 am
Goot yob pronzeeeeeeeeee. I lub dee attention to detail...
Looks KILLER...lol sorry I had to....haha
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Mon Oct 17, 2011 5:21 am
^Naw man, look tight.
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
jasondavis48108
Member
Posts: 2919 Joined: Fri Apr 24, 2009 12:36 pm
Location: Ann Arbor
Post
by jasondavis48108 » Mon Oct 17, 2011 11:14 am
That has to be the best modded ruff I've seen. Really well done
"Only the curious have, if they live, a tale worth telling at all" Alastair Reid
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Wed Oct 26, 2011 5:34 am
Here is a picture of the folding pegs I had welded on.
BTX metal fabrication. Killer Scooter.
BuddyJ
Member
Posts: 109 Joined: Mon May 04, 2009 6:27 pm
Location: Weatherford, OK
Post
by BuddyJ » Wed Oct 26, 2011 7:25 pm
Love it! What'd you do to get the stretch? It looks great.
'06 Buddy 125 - Prima pipe - 11g Dr. Pulley sliders - NCY transmission kit - Prima 161cc kit - NCY big valve head - Unifilter
'09 Stella - Hot Reeds - Hot Wing
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Thu Oct 27, 2011 5:11 am
BuddyJ wrote: Love it! What'd you do to get the stretch? It looks great.
. Killer Scooter gy6 mount for Honda Ruckus/ modified....
BTX metal fabrication. Killer Scooter.
viney266
Member
Posts: 2270 Joined: Thu May 19, 2011 8:49 pm
Location: westminster md
Contact:
Post
by viney266 » Fri Oct 28, 2011 6:58 pm
Nice job on adding the footpegs ...Great lookin ride!
Speed is only a matter of money...How fast do you want to go?
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Wed Nov 02, 2011 6:30 am
Fabrication done by Gearguy of Gearheinz Power Service in Duarte Ca. Thanks buddy!
Polishing done by Lucero's Polish and Repair in So. El Monte Ca.
BTX metal fabrication. Killer Scooter.
SuperCyclone.81
Member
Posts: 282 Joined: Sat Jan 21, 2012 10:53 pm
Location: Fayetteville Arkansas
Post
by SuperCyclone.81 » Thu Feb 09, 2012 6:53 pm
How much CF wrap did you need to cover the plastics you covered?
guam_rattler
Member
Posts: 43 Joined: Fri Apr 23, 2010 8:29 am
Location: on the island
Post
by guam_rattler » Wed Feb 15, 2012 6:49 pm
really interested in knowing how u used the gy6 mount...how much modification was needed?
proonzee
Member
Posts: 13 Joined: Thu Sep 29, 2011 3:19 am
Location: sgv
Post
by proonzee » Fri Feb 17, 2012 9:40 am
Killer scooter gy6 mount for honda ruckus.....reversed
BTX metal fabrication. Killer Scooter.
guam_rattler
Member
Posts: 43 Joined: Fri Apr 23, 2010 8:29 am
Location: on the island
Post
by guam_rattler » Sun Feb 19, 2012 2:42 am
proonzee wrote: Killer scooter gy6 mount for honda ruckus.....reversed
thanx
RoadRambler
Member
Posts: 181 Joined: Tue May 31, 2011 2:29 pm
Location: South of Richmond, VA
Post
by RoadRambler » Tue Feb 21, 2012 3:15 am
WOW, ALL. the stages looked fantastic but love the bronze color. Fabulous!
batgirl101
Member
Posts: 268 Joined: Sun Jun 26, 2011 5:22 am
Location: San Francisco
Post
by batgirl101 » Sun Mar 11, 2012 3:17 am
seriously awesome
JHScoot
Member
Posts: 2745 Joined: Tue Jul 13, 2010 11:05 pm
Location: Los Angeles
Post
by JHScoot » Thu Mar 15, 2012 12:17 pm
for never "seriously intending to do any modding" you sure got some done!
great little scoot
Riding is riding
bigbropgo
Member
Posts: 1607 Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801
Post
by bigbropgo » Sun Sep 02, 2012 12:06 am
$500 ? ^
no i don't ride a scooter, i am a scooter pilot!
VICTUS MORTUUS VENATOR
alusthhedush
Member
Posts: 3 Joined: Sat Sep 01, 2012 2:14 am
Location: Chicago
Post
by alusthhedush » Tue Sep 04, 2012 3:16 pm
^not necessarily...i was just trying to see if this is the right part or not
spr0k3t
Member
Posts: 426 Joined: Wed Jun 06, 2012 12:14 am
Location: Kansas City
Post
by spr0k3t » Tue Sep 04, 2012 7:35 pm
yup... that should be the right part.
buddyz
Member
Posts: 19 Joined: Fri Jan 25, 2013 12:22 am
Location: Bloomington, Indiana
Contact:
Post
by buddyz » Thu May 08, 2014 6:31 pm
This is sweet. Very nice work!
This is the inspiration I needed for some Roughhouse mods I've been considering.
davidhutchins09
Member
Posts: 3 Joined: Wed Jun 05, 2019 4:39 am
Post
by davidhutchins09 » Wed Jun 05, 2019 4:44 am
Hi guys, just joined this forum after a month or so of reading posts in here. Is this still pretty active?
I bought a 2016 Roughhouse R50 for $300 about a month and a half ago, and im loving it. I got it running and in perfect shape, added a Yasumi Z pipe, 90 jet, and 6g roller weights. My near future plans for the scoot is a 70cc kit, new tires, and transmission upgrades. Later, I am thinking about lowering it and possibly figuring out a stretch.
Stanza
Member
Posts: 575 Joined: Mon Jan 29, 2018 8:34 pm
Location: Chicago
Post
by Stanza » Wed Jun 05, 2019 1:31 pm
It is active, but you'd be better served by starting your own new post rather than tagging on to a thread that's been dead for 5 years.