4T 200 cutdown project.
Moderator: Modern Buddy Staff
-
- Member
- Posts: 214
- Joined: Fri Aug 17, 2012 12:25 pm
4T 200 cutdown project.
A month ago an old lady pulled out in front of me and gave me my first flying lesson
She also did this to my scoot,
The scoot was a 'Cat C' write off which means it can go back on the road so I bought it back from the insurance company and I plan on cutting it down.
The rear bodywork section was pretty easy to remove once we figured out where all the bolts were.
The leg shields were pretty easy to hammer back into shape, just need to decide how I am going to cut it down now.
My mate badger with the essential tools,
With the tank and the seat removed the riding position is nice and low, I am thinking of cutting the leg shields back to the horn cast down to where the floor runner rivet on and then leaving the running boards full width kinda like this old lammy.
Im going to remove the big air box,fit a foam filter and move the battery under the seat. I will also have to fit a center tank as the normal tank wont mount in the same position with the read body work removed.
Will post plenty of pics as the process progresses
She also did this to my scoot,
The scoot was a 'Cat C' write off which means it can go back on the road so I bought it back from the insurance company and I plan on cutting it down.
The rear bodywork section was pretty easy to remove once we figured out where all the bolts were.
The leg shields were pretty easy to hammer back into shape, just need to decide how I am going to cut it down now.
My mate badger with the essential tools,
With the tank and the seat removed the riding position is nice and low, I am thinking of cutting the leg shields back to the horn cast down to where the floor runner rivet on and then leaving the running boards full width kinda like this old lammy.
Im going to remove the big air box,fit a foam filter and move the battery under the seat. I will also have to fit a center tank as the normal tank wont mount in the same position with the read body work removed.
Will post plenty of pics as the process progresses
-
- Member
- Posts: 239
- Joined: Thu Sep 20, 2012 8:16 pm
- Location: Santa Barbara, CA
Tipper,
Sorry to hear about the accident. It's damn shame, but I am glad you're ok.
This is a little off topic, but I couldn't help but notice that you have the Heidenau K47 on Boy Blue. Have you ridden the K61 as well? How do they compare? I've heard great things about the K61, but little about the K47.
Thanks, and good luck with the cutdown.
Sorry to hear about the accident. It's damn shame, but I am glad you're ok.
This is a little off topic, but I couldn't help but notice that you have the Heidenau K47 on Boy Blue. Have you ridden the K61 as well? How do they compare? I've heard great things about the K61, but little about the K47.
Thanks, and good luck with the cutdown.
- az_slynch
- Member
- Posts: 1808
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
Ouch! At least your bike wasn't written off.
Thank you for sharing the photos of the tail section removed. It's interesting to look under the skin and see how much space there is. Take least the tube frame will let you play with the rear sheet metal without compromising structural integrity.
Badger needs a bigger hammer.
Thank you for sharing the photos of the tail section removed. It's interesting to look under the skin and see how much space there is. Take least the tube frame will let you play with the rear sheet metal without compromising structural integrity.
Badger needs a bigger hammer.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
-
- Member
- Posts: 214
- Joined: Fri Aug 17, 2012 12:25 pm
I am a full Heidenau convert !magnato1 wrote:Tipper,
Sorry to hear about the accident. It's damn shame, but I am glad you're ok.
This is a little off topic, but I couldn't help but notice that you have the Heidenau K47 on Boy Blue. Have you ridden the K61 as well? How do they compare? I've heard great things about the K61, but little about the K47.
Thanks, and good luck with the cutdown.
I used to run the k58's in the winter and then switch to K61's in the summer. The k58's are unbeatable in the wet but wear out quickly on dry roads where as the k61's are great in the dry but felt a little bit twitchy in heavy rain.
I have found that the k47's are a happy medium between the two and a great all round tyre. I would recommend them to anyone.
I managed to escape the accident with fairly minor injuries.Lower back was bruised where I landed and I somehow managed to cut a pretty deep hole in my shin which had to be glued together.
I have bought myself this beauty with the insurance money.
-
- Member
- Posts: 214
- Joined: Fri Aug 17, 2012 12:25 pm
ThanksDrum Pro wrote:Awsome new scoot. Love it!!!!
I wanted to order one of the special edition 'Mat series' bikes (http://www.lmlitalia.com/moduli/scooter ... dlinea=245)
But the UK importer cant get a reliable supply of them from Italy so they have given up trying to import them.
I spoke to a dealer in the UK called Piccolo Moto and they offered to strip a standard black scooter down,send it off to a paint shop,get it sprayed satin black and then put it all back together and deliver it to my door. All for the same price as the special edition scoot.
Amazing customer service.
The brown seat will be the first thing to go !
- Drum Pro
- Member
- Posts: 1163
- Joined: Thu Sep 01, 2011 4:03 am
- Location: Victorville, Ca.
-
- Member
- Posts: 173
- Joined: Sun Aug 19, 2012 4:31 pm
- Location: Las Vegas, Nv
-
- Member
- Posts: 239
- Joined: Thu Sep 20, 2012 8:16 pm
- Location: Santa Barbara, CA
Tipper,Tipper wrote:I am a full Heidenau convert !magnato1 wrote:Tipper,
Sorry to hear about the accident. It's damn shame, but I am glad you're ok.
This is a little off topic, but I couldn't help but notice that you have the Heidenau K47 on Boy Blue. Have you ridden the K61 as well? How do they compare? I've heard great things about the K61, but little about the K47.
Thanks, and good luck with the cutdown.
I used to run the k58's in the winter and then switch to K61's in the summer. The k58's are unbeatable in the wet but wear out quickly on dry roads where as the k61's are great in the dry but felt a little bit twitchy in heavy rain.
I have found that the k47's are a happy medium between the two and a great all round tyre. I would recommend them to anyone.
I managed to escape the accident with fairly minor injuries.Lower back was bruised where I landed and I somehow managed to cut a pretty deep hole in my shin which had to be glued together.
I have bought myself this beauty with the insurance money.
Thanks for the info! I was hoping you'd say that the K47 is a nice blend of the two. I don't see too much rain, but since the Stella is my only means of transportation (aside from my feet), I want an all around performing tire. The tread pattern looked just right, and you've confirmed the quality. Thanks again.
Also, you're new Star is sexual. Lock it up, people will want to steal it, seriously. Congrats!
-
- Member
- Posts: 214
- Joined: Fri Aug 17, 2012 12:25 pm
I think it's the 'secondary air system' fitted so the scooter will pass what is most commonly known as 'European emissions bollocks'.magnato1 wrote:What's the thing with all of the tubes coming out of it in front of the air box?
When the throttle is closed the EGR valve opens and air is sucked into the engine to mix with the exhaust gases effectively watering them down.
-
- Member
- Posts: 536
- Joined: Wed Apr 25, 2012 2:46 am
- Location: Desplaines Il.
Correct, sort of.Tipper wrote:I think it's the 'secondary air system' fitted so the scooter will pass what is most commonly known as 'European emissions bollocks'.magnato1 wrote:What's the thing with all of the tubes coming out of it in front of the air box?
When the throttle is closed the EGR valve opens and air is sucked into the engine to mix with the exhaust gases effectively watering them down.
Secondary air system is there to provide air into the exaust.
This causes any unburned fuel to burn in the exaust system.
If you ever have the opportunity to run a 4T engine with the exaust removed at the head you will see a flame with every exaust valve opening.
Because there is no exaust pipe, the surrounding air keeps the fire burning if there is any unburned fuel being exausted.
Once the exaust is installed, there is no source of oxygen so the unburned fuel continues through the exaust and is expelled......but by then it has cooled so much no burning can occur.
Sometimes a lower restriction exaust will retain enouph heat to cause a phenominum called afterfire.
This is the popping that occurs on deceleration and many call it (incorrectly) a backfire.
Anyways, a secondary air system causes no loss in performance beyond the weight of the valves and hoses and whatnot.
It is also known as Pulseair.......regardless of the name, each system uses the negative pulse between exaust events to pull fresh air through the system into the exaust.
The S.A.S. valve closes the moment the exaust pressurizes otherwise exaust would be pushed into the airbox.
Tipper, the new machine looks fabulous and the best news is you were not hurt too much.
I too am bummed the 200 hasn't made it to this side of the pond.......yet.
Rob
- JohnKiniston
- Member
- Posts: 578
- Joined: Mon Jun 18, 2012 5:08 pm
- Location: Tucson, AZ
- Contact:
-
- Member
- Posts: 173
- Joined: Sun Aug 19, 2012 4:31 pm
- Location: Las Vegas, Nv
-
- Member
- Posts: 214
- Joined: Fri Aug 17, 2012 12:25 pm
Thanks for the explanation Rob. So would you say there are no benefits in removing this system ?Robbie wrote:Correct, sort of.Tipper wrote:I think it's the 'secondary air system' fitted so the scooter will pass what is most commonly known as 'European emissions bollocks'.magnato1 wrote:What's the thing with all of the tubes coming out of it in front of the air box?
When the throttle is closed the EGR valve opens and air is sucked into the engine to mix with the exhaust gases effectively watering them down.
Secondary air system is there to provide air into the exaust.
This causes any unburned fuel to burn in the exaust system.
If you ever have the opportunity to run a 4T engine with the exaust removed at the head you will see a flame with every exaust valve opening.
Because there is no exaust pipe, the surrounding air keeps the fire burning if there is any unburned fuel being exausted.
Once the exaust is installed, there is no source of oxygen so the unburned fuel continues through the exaust and is expelled......but by then it has cooled so much no burning can occur.
Sometimes a lower restriction exaust will retain enouph heat to cause a phenominum called afterfire.
This is the popping that occurs on deceleration and many call it (incorrectly) a backfire.
Anyways, a secondary air system causes no loss in performance beyond the weight of the valves and hoses and whatnot.
It is also known as Pulseair.......regardless of the name, each system uses the negative pulse between exaust events to pull fresh air through the system into the exaust.
The S.A.S. valve closes the moment the exaust pressurizes otherwise exaust would be pushed into the airbox.
Tipper, the new machine looks fabulous and the best news is you were not hurt too much.
I too am bummed the 200 hasn't made it to this side of the pond.......yet.
Rob
-
- Member
- Posts: 536
- Joined: Wed Apr 25, 2012 2:46 am
- Location: Desplaines Il.
Tipper,
I cannot see any benefit beyond a tiny bit of weight reduction......this system only provides a means to clean up the exaust after it exits the engine and has no effect on power or driveability.
The system also helps the catalyst 'light off' or begin the conversion process sooner after startup and this makes the pollution police happier.
On another note, I do ghost your LML UK forum and recommend it to all....rather interesting crowd at your side of the pond......I get good info and a LOT of laughs.
Happy New Year,
Rob
I cannot see any benefit beyond a tiny bit of weight reduction......this system only provides a means to clean up the exaust after it exits the engine and has no effect on power or driveability.
The system also helps the catalyst 'light off' or begin the conversion process sooner after startup and this makes the pollution police happier.
On another note, I do ghost your LML UK forum and recommend it to all....rather interesting crowd at your side of the pond......I get good info and a LOT of laughs.
Happy New Year,
Rob