My 2012 Stella came pre-emission parts removed. I was cleaning the carb and noticed two loose hoses and was wondering where they go.
The first runs from the top of the carb second from the bottom. My guess is the bottom is the overflow. But what about the top one? Does it need plugged or left open?
Thanks.
Stella 4T Carb Hoses
Moderator: Modern Buddy Staff
- jkblaq
- Member
- Posts: 15
- Joined: Tue Jun 10, 2014 3:04 pm
- Location: Columbus, OH
- Neurotic-Hapi-Snak
- Member
- Posts: 335
- Joined: Thu Jun 05, 2014 2:56 am
- Neurotic-Hapi-Snak
- Member
- Posts: 335
- Joined: Thu Jun 05, 2014 2:56 am
Well, the hose for the carb bowl drain is only used when you remove the carb (you actually can't reach the drain screw while it's on the scooter) and need to drain the bowl to disassemble it. But it's best to leave it on so you don't misplace it.jkblaq wrote:Nevermind, now that I re-read your post overflow and drain so both should be left as is. Thanks again.
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Yet I still manage to spill gas when I pull mine.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…