Hello -
I've completely confused myself by reading so many threads, so I am hoping someone can offer some quick advice.
I have a stock 2005 PX150 Stella with sidecar. The only mod I want to make right now is to de-blue the filter. Here are my questions:
1) The current filter is looking rough, so I was going to replace it altogether rather than just deblue. Can someone confirm that this filter will work in my stock Stella? My understanding is this is basically just a de-blued filter that should work, but I am wondering if there are other adjustments I need to make (other than upjetting) to get this to fit/work?
http://www.scooterwest.com/items/?_page ... 1083)/1429
2) My understanding is that I also need to upjet in order to use this filter. From what I've discovered, the current main jet in my Stella is a 94, but that seems really low. I thought stock was 98? If 94 is right, then what would you recommend if I go with the above filter?
Thanks so much!
2005 PX150 Filter/Jetting Question
Moderator: Modern Buddy Staff
-
- Member
- Posts: 13
- Joined: Mon Aug 04, 2014 5:12 pm
Hello - is anyone able to confirm whether this filter is basically the equivalent of drilling and debluing a stock air filter in a Stella 2005 2T? Or is the sizing different?
http://www.sip-scootershop.com/en/produ ... +_40250000
Thanks!
http://www.sip-scootershop.com/en/produ ... +_40250000
Thanks!
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
I think it'll fit, but the one you want is probably this one:
http://www.scooterwest.com/items/?_page ... Carbs/1428
SIP has it as well, but it'll cost you more.
http://www.scooterwest.com/items/?_page ... Carbs/1428
SIP has it as well, but it'll cost you more.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…