Roughhouse 50 WiP

Scooter and Rally Pictures and Videos

Moderator: Modern Buddy Staff

Post Reply
User avatar
spr0k3t
Member
Posts: 426
Joined: Wed Jun 06, 2012 12:14 am
Location: Kansas City

Roughhouse 50 WiP

Post by spr0k3t »

So I thought I would start a thread which has a little better overview of my visual build. I'll update the original post with mods as the build goes on.

Visual mods:
* Delobstered
* Rear fender removed
* Front indicator relocated
* Custom stitched low-profile seat
* YSS Adjustable rear shock, 280mm down to 249mm
Attachments
Photo taken in a cave, current as of 7/4/2012
Photo taken in a cave, current as of 7/4/2012
IMG_20120704_130620.jpg (37.92 KiB) Viewed 1419 times
This is the stock 2013 RH50, only 32 miles.
This is the stock 2013 RH50, only 32 miles.
IMG_20120609_173046.jpg (76.09 KiB) Viewed 1419 times
User avatar
spr0k3t
Member
Posts: 426
Joined: Wed Jun 06, 2012 12:14 am
Location: Kansas City

Post by spr0k3t »

Here's a better shot of the custom seat.
Attachments
IMG_20120704_130637.jpg
IMG_20120704_130637.jpg (47.43 KiB) Viewed 1416 times
User avatar
spr0k3t
Member
Posts: 426
Joined: Wed Jun 06, 2012 12:14 am
Location: Kansas City

Post by spr0k3t »

So, here's a bit of an update to the work I've been doing. I've still got quite a bit of tuning left to go, but the awesome news is that I've gotten the scooter up to 50+mph. I haven't finished tuning the weights just yet. Right now I've got 14gr balanced with 8gr giving me 11gr estimate. The scooter will easily hit 50 once it breaks past 12mph (tuning needed with the HiT clutch for harder impact)... best part is that it will easily hold 50+ even going uphill. The engine tune is very nice... extremely happy caramel color after near 60mph plug chop.

The big brake kit is on, the front wheel is upgraded 12", better set of tires on (Vee Rubbers), 21mm DelOrto installed, airbox modded, the exhaust is happily tuned,

So onward for a slightly heavier set of rollers... going to try out 12gr average before moving on to sliders. I still need to upgrade the clutch springs (as well as the pillow). I think I may need to upgrade the contra to a 2500, but we'll see how well the clutch goes after the weight tuning.
Attachments
Better view of the completed head gear
Better view of the completed head gear
IMG_20121023_174655-sm.jpg (94.94 KiB) Viewed 1330 times
Exhaust teaser... muahaha
Exhaust teaser... muahaha
IMG_20121023_174636-sm.jpg (77.13 KiB) Viewed 1330 times
Side shot... pardon the nekkedness
Side shot... pardon the nekkedness
IMG_20121023_174619-sm.jpg (88.12 KiB) Viewed 1330 times
Better view of the Big Brake Kit
Better view of the Big Brake Kit
IMG_20121023_172122-sm.jpg (73.74 KiB) Viewed 1330 times
User avatar
JHScoot
Member
Posts: 2745
Joined: Tue Jul 13, 2010 11:05 pm
Location: Los Angeles

Post by JHScoot »

nice! slick job :)
Riding is riding
User avatar
z20k
Member
Posts: 137
Joined: Fri Aug 24, 2012 10:58 pm
Location: Austin, TX

Post by z20k »

That's a sick handlebar setup. What kind of cluster are you using?
Oh, so they have internet on computers now!
sajjad123
Member
Posts: 1
Joined: Mon Dec 15, 2014 10:58 am

Post by sajjad123 »

So onward for a slightly heavier set of rollers... going to try out 12gr average before moving on to sliders. I still need to upgrade the clutch springs (as well as the pillow). I think I may need to upgrade the contra to a 2500, but we'll see how well the clutch goes after the weight tuning.
aliiiii
Post Reply