Slight pull at 2.5 turns out runs fine sploog
Need a slightly smaller piolet leave it or fix?
I have no issues thinking of adding non fouler only starts easy cold and hot out.
Cone filted currently.
To splooge or not to splooge that is the question
Moderator: Modern Buddy Staff
-
- Member
- Posts: 81
- Joined: Thu Jan 07, 2016 2:50 am
- Location: Seattle, WA
-
- Member
- Posts: 81
- Joined: Thu Jan 07, 2016 2:50 am
- Location: Seattle, WA
B02S4 wrote:Sploog to the left of me,
Piolet to the right,
here I am,
stuck in the middle wit yo
The question is, if I can't seize or overheat why bother? running seafoam is no issue to me more oil actually promotes the sealing of the rings.
So a tank of seafoam shall combat any splooge stick and exhaust clog up.
A non fouler with hotter burning plugs + coil sounds more logical BTW
Why does my scooter hate 92 octane vs 87 on a done top piston it was equipped own with a dish piston in the 80s.
92 I have a sense that my hg fried after changing gas but it was already leaky. I have new one at least.
Better yet since it is rich at the piolet, I could drop a new exhaust stage 2 which will definatly overcome the extra fuel to oil I may only be rich because a cone filter is on it.
-
- Member
- Posts: 187
- Joined: Tue Sep 30, 2014 2:09 am
- Location: Southeast WI
sorry dude, I cant help ya. You lost me with "sploog" right away, I'm still not sure what that means.Slight pull at 2.5 out.... ummm, maybe jam it in all the way???? Then, "piolet"... ( I think it comes up as some sort of ice axe???)... I don't know 'bout that one either. As for octane... my scooter recommends 87 octane, so that's what I use (haven't used any seafoam ).
So, unfortunately, I cant help ya, however, I must admit I am still laughing my a$$ off at B02S4's response!!!
So, unfortunately, I cant help ya, however, I must admit I am still laughing my a$$ off at B02S4's response!!!
- FromHereToThere
- Member
- Posts: 83
- Joined: Sun Feb 14, 2016 4:56 am
- Location: Kitty Hawk
-
- Member
- Posts: 81
- Joined: Thu Jan 07, 2016 2:50 am
- Location: Seattle, WA
FromHereToThere wrote:Fantastic song. I can't hear it without thinking of this scene..........B02S4 wrote:Sploog to the left of me,
Piolet to the right,
here I am,
stuck in the middle wit yo
Splooge unburnt fuel and oil out exhaust. Spit up!
At the end of the day when its hot and my scoot is hot we both look sexy wet------- who wan the wet competition?
The scooter, man my scoot gets all the the moped tang unlike its dad it doesnt have wedding rings hahah!
The scooter, man my scoot gets all the the moped tang unlike its dad it doesnt have wedding rings hahah!
-
- Member
- Posts: 81
- Joined: Thu Jan 07, 2016 2:50 am
- Location: Seattle, WA
luckyscroller788 wrote:sorry dude, I cant help ya. You lost me with "sploog" right away, I'm still not sure what that means.Slight pull at 2.5 out.... ummm, maybe jam it in all the way???? Then, "piolet"... ( I think it comes up as some sort of ice axe???)... I don't know 'bout that one either. As for octane... my scooter recommends 87 octane, so that's what I use (haven't used any seafoam ).
So, unfortunately, I cant help ya, however, I must admit I am still laughing my a$$ off at B02S4's response!!!
2.5k rpm splooge is unburnt oil and fuel that exit the exhaust splooge can also spit up between exhaust port and muffler flange.
At the end of the day when its hot and my scoot is hot we both look sexy wet------- who wan the wet competition?
The scooter, man my scoot gets all the the moped tang unlike its dad it doesnt have wedding rings hahah!
The scooter, man my scoot gets all the the moped tang unlike its dad it doesnt have wedding rings hahah!