Polini Exhaust for LML 125/150 4T

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
User avatar
srbbnd
Member
Posts: 223
Joined: Fri Feb 07, 2014 1:52 am
Location: Butt F@#$ No Where Missouri

Polini Exhaust for LML 125/150 4T

Post by srbbnd »

Anyone have any experience with this exhaust?

http://www.sip-scootershop.com/EN/Produ ... +_19000140
Image
User avatar
jimmbomb
Member
Posts: 801
Joined: Fri May 20, 2011 1:00 am
Location: St Louis

Post by jimmbomb »

Here's my experience with it and a first year 2010 Stella 4t
viewtopic.php?t=18745&highlight=polini

Good luck deciding
J H
[URL=https:///]Image[/URL] upload pics
User avatar
srbbnd
Member
Posts: 223
Joined: Fri Feb 07, 2014 1:52 am
Location: Butt F@#$ No Where Missouri

Post by srbbnd »

Awesome thanks!
Image
User avatar
viney266
Member
Posts: 2270
Joined: Thu May 19, 2011 8:49 pm
Location: westminster md
Contact:

Post by viney266 »

I have installed and stock the GPR and I really like it. Check into it as well.
Speed is only a matter of money...How fast do you want to go?
User avatar
Stilts
Member
Posts: 281
Joined: Thu Jun 23, 2011 7:33 pm
Location: Baltimore, MD
Contact:

Post by Stilts »

I second the GPR exhaust.
Image
User avatar
jimmbomb
Member
Posts: 801
Joined: Fri May 20, 2011 1:00 am
Location: St Louis

Post by jimmbomb »

Any-1 here do a write up and photos of the GPR? I must have missed them.links, anybody?
Thanks
J H
[URL=https:///]Image[/URL] upload pics
User avatar
phunksoulbrotha
Member
Posts: 25
Joined: Thu Aug 06, 2015 10:58 pm
Location: Down the Rabbit Hole

Post by phunksoulbrotha »

Slotrod65 gives a nice little write-up of the GPR in this thread: viewtopic.php?t=26301&highlight=gpr+exhaust
Starts about halfway down the first page.

On another note, I just got done with the airbox chop/pod filter install, in addition to adding the Polini carb package and the new V3 exhaust from Tasso. Hoping to put it through it's paces tomorrow as I've just had time to cruise around town since the install but initial impressions are good. I'll try to give some detail tomorrow so the OP has one more exhaust to consider.
User avatar
jimmbomb
Member
Posts: 801
Joined: Fri May 20, 2011 1:00 am
Location: St Louis

Post by jimmbomb »

phunksoulbrotha wrote:Slotrod65 gives a nice little write-up of the GPR in this thread: viewtopic.php?t=26301&highlight=gpr+exhaust
Starts about halfway down the first page.

On another note, I just got done with the airbox chop/pod filter install, in addition to adding the Polini carb package and the new V3 exhaust from Tasso. Hoping to put it through it's paces tomorrow as I've just had time to cruise around town since the install but initial impressions are good. I'll try to give some detail tomorrow so the OP has one more exhaust to consider.
Very nice, thanks..
We're all anxious to see your write up on those mods.
Check it out, now, Funk SB
J H
[URL=https:///]Image[/URL] upload pics
Post Reply