Hi All,
New Scooter owner here and just purchased a Buddy Kick. Took a bit of a tumble on it and banged up some of the panels. I Looked into and ordered some replacements from scooterloungeonline and was going to attempt to fix myself.
Looks like I'm going to have to replace the back side, whole front, and Black plastic interior. Ive attached a pic for reference.
Anyone with experience at this? Looked on youtube and found plenty of videos showing the process for other Buddy Scooters but not the Kick. Any resources out there? Advise? Thoughts?
Much thanks in advance.
Best,
Dom
Buddy Kick panel replacement
Moderator: Modern Buddy Staff
-
- Member
- Posts: 1
- Joined: Thu Jun 08, 2017 3:23 pm
- Location: Philadelphia
Buddy Kick panel replacement
- Attachments
-
- Scooter Damage.jpeg (109.83 KiB) Viewed 366 times
- Dooglas
- Moderator
- Posts: 4368
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
Sorry to hear you dropped your new Kick. Not much experience with repairs to the Kick out there but removing and replacing panels shouldn't differ greatly from the Buddy. Can you obtain the Service Manual through a dealer?
Have you taken an MSF course? Might still be a good idea. It would also be helpful to others if you post details on the "Who's Crashed" thread.
Have you taken an MSF course? Might still be a good idea. It would also be helpful to others if you post details on the "Who's Crashed" thread.
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
-
- Member
- Posts: 123
- Joined: Wed Aug 24, 2016 9:29 pm
- Location: Philadelphia