Yamaha BWS 100 and PGO 110 Motor compatability.
Moderator: Modern Buddy Staff
-
- Member
- Posts: 6
- Joined: Sun Sep 14, 2008 3:27 pm
- Location: So Cali
Yamaha BWS 100 and PGO 110 Motor compatability.
Can components be swapped from the Yamaha BWS100 and PGO 110 motors?
I know PGO basically copied the Yamaha Minarelli motor and called it their own. I'm hoping some of the critical components like variators, pistons, gaskets, crankshafts, bearings can be swapped over to the PGO 110 motor....for the sake of obtaining parts.
Thanks.
I know PGO basically copied the Yamaha Minarelli motor and called it their own. I'm hoping some of the critical components like variators, pistons, gaskets, crankshafts, bearings can be swapped over to the PGO 110 motor....for the sake of obtaining parts.
Thanks.
- bigbropgo
- Member
- Posts: 1607
- Joined: Thu Jul 31, 2008 1:41 am
- Location: gotham city and the 801
-
- Member
- Posts: 69
- Joined: Tue Mar 10, 2009 8:25 am
- Location: Guam
- Contact:
-
- Member
- Posts: 6
- Joined: Sat Dec 26, 2009 6:17 pm
- Location: Hsinchu, Taiwan
PGO/Yamaha parts compatability
A Yamaha BWS100 cylinder is shorter than a PGO 110 cylinder. You need to fabricate a spacer plate to make it fit a PGO.
- bigbropgo
- Member
- Posts: 1607
- Joined: Thu Jul 31, 2008 1:41 am
- Location: gotham city and the 801
-
- Member
- Posts: 79
- Joined: Sat Nov 14, 2009 1:59 pm
You can get a Mulitvar CVT from Malossi and a 126cc Malossi big bore kit too. 21mm Delorto fits, as does the Arreche (machine the manifold to suit) Or you can cut the inlet stub off your manifold and put a much larger diameter pipe on there with a short piece of high pressure hose. Then you can fir a nice big spigot mounted carb. A 30mm would go very well with the Malossi cylinder kit. A good exhaust option would be a Yasuni.
With the right gearing, you should be able to see 80mph without too much trouble.
With the right gearing, you should be able to see 80mph without too much trouble.
-
- Member
- Posts: 2
- Joined: Sun May 13, 2018 1:21 am
- Location: cape town
troker crank to get the most out of big bore kit
hi I own a pmx 110 nd would like to know if there is a stroker crank for said bike? jiangwayne say there big bore kit will work on pmx but need a 50mm crank to get upto 128cc. they sell a crank but there is no pmx on fitment list on site. will I only get117cc out of kit? what is the spacer story with my bike? some say yes others no. thank you for your time. I hope to get some (good) news soon. michael Andrew.
-
- Member
- Posts: 660
- Joined: Sun Jan 15, 2012 2:55 am
- Location: kansas city mo
You can use the yamaha top end but you will need to either have a spacer cut or make a spacer because the PGO has a longer stroke crank. I've been told that taida will be releasing compatible cylinder kits up 154cc, case machining will be required.
161cc big bore kit, NCY big valve head Hand ported, NCY transmission kit, jetted and tuned. I can port your cylinder head.
-
- Member
- Posts: 2
- Joined: Sun May 13, 2018 1:21 am
- Location: cape town
thank for info. you have no idea on thickness of spacer? between 1.2mm and 1.5mm ive been told but that sounds a bit of loose guideline for me. I have a guy that ports all my racing heads 30 m from my workshop door, but thanks for the offer. those bigbore kits sound insane. you have no idea where to get a pgo performance crank? a distributor that shipps to cape town south Africa from the usa is hard to find. nd most of the bigger name stores in europe just couldn't be bothered. please keep updated on those new BIG BORE kits . thank you so much for your time . looking forward for more good news. michael Andrew boshoff
-
- Member
- Posts: 660
- Joined: Sun Jan 15, 2012 2:55 am
- Location: kansas city mo
I would recommend you get on the taida website and look at the yamaha bws100 cylinders. I had a local scooter dealer order my parts for me from taida direct. You need to assemble your engine and check the deck height yourself to get the correct spacer thickness. As for looking for parts you could contact scooterswapshop. They are very active on facebook and can get you going in the right direction. I think I've seen them do some international shipping.
161cc big bore kit, NCY big valve head Hand ported, NCY transmission kit, jetted and tuned. I can port your cylinder head.