Buddy 125 Rear Shock Options
Moderator: Modern Buddy Staff
-
- Member
- Posts: 7
- Joined: Wed Jun 05, 2019 7:21 pm
- Location: New York
Buddy 125 Rear Shock Options
Hi Everyone, new user here! I bought a lightly used 2007 Buddy about a month ago and have been really enjoying the experience! And this forum has been an amazing resource thus far.
I live in NYC and the roads are bumpy to say the least. Ive been finding that the stock suspension leaves a lot to be desired. Going over even small pot holes or manhole covers is pretty jarring. Things get worse when I have a passenger on board.
I've read a lot of older threads on this topic, and see that YSS shocks were often recommended as a less expensive option than the NCY upgrade. Unfortunately, I don't think the Buddy-specific YSS shocks are available any more.
Does anyone here have experience upgrading their suspension with something other than the NCY shock? I've seen other companies like Yassau, Fastace, etc that *might* fit, have good user reviews, and are about half the price.
Thank you for any advice in advance!
I live in NYC and the roads are bumpy to say the least. Ive been finding that the stock suspension leaves a lot to be desired. Going over even small pot holes or manhole covers is pretty jarring. Things get worse when I have a passenger on board.
I've read a lot of older threads on this topic, and see that YSS shocks were often recommended as a less expensive option than the NCY upgrade. Unfortunately, I don't think the Buddy-specific YSS shocks are available any more.
Does anyone here have experience upgrading their suspension with something other than the NCY shock? I've seen other companies like Yassau, Fastace, etc that *might* fit, have good user reviews, and are about half the price.
Thank you for any advice in advance!
- Stanza
- Member
- Posts: 575
- Joined: Mon Jan 29, 2018 8:34 pm
- Location: Chicago
It seems to be a common theme with the "upgraded" shocks, that they tend to stiffen the ride. Are you getting jarred because the stock setup is bottoming out? If so, then def look into the NCY front forks for starters. But if it's not bottoming out, and it's already stiff enough to rattle your teeth, then stiffer springs may only make things worse.
-
- Member
- Posts: 7
- Joined: Wed Jun 05, 2019 7:21 pm
- Location: New York
I'm mostly interested in being able to adjust the preload so that when I have a passenger, the ride is smoother. The rear shock is very compressed if I have a passenger and doesn't have much travel for bumps/terrain. And when I'm riding by myself, it seems like the ride is too soft or spongey with the stock shock. The bike seems to overreact when I hit even a small bump, if that makes sense. I don't necessarily want the ride to be stiff, just "better," haha.
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
I had the exact same issue with my Buddy 150. I'm not a large guy but whenever I sat on the scooter the rear shock would just about be completely compressed. I felt every bump, pothole, pebble, and bug on the road. Along with the overly soft spring, there was no dampening to speak of so my scooter handled like a pogostick. To fix it I replaced the rear shock with a YSS meant for a Kymco People 50. The fit is tight but it works great. If you're interested, you can read about it here: http://www.modernbuddy.com/forum/topic30354.html.mnika wrote:I'm mostly interested in being able to adjust the preload so that when I have a passenger, the ride is smoother. The rear shock is very compressed if I have a passenger and doesn't have much travel for bumps/terrain. And when I'm riding by myself, it seems like the ride is too soft or spongey with the stock shock. The bike seems to overreact when I hit even a small bump, if that makes sense. I don't necessarily want the ride to be stiff, just "better," haha.
The ride is definitely firmer but the handling is far, far better. I'm used to riding sport bikes so the firm ride is no problem.
Some people can break a crowbar in a sandbox.
- DeeDee
- Member
- Posts: 1105
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
Here is an adjustable 280mm Forsa. Great shock, made in Taiwan. https://www.ebay.com/itm/GY6-FORSA-Perf ... SwopRYhWkf
- Attachments
-
- Screenshot 2019-06-07 at 6.26.45 AM.png (182.16 KiB) Viewed 4137 times
- skully93
- Member
- Posts: 2597
- Joined: Sat Dec 31, 2011 3:54 pm
- Location: Denver CO
Is that the one you had on your 170i?DeeDee wrote:Here is an adjustable 280mm Forsa. Great shock, made in Taiwan. https://www.ebay.com/itm/GY6-FORSA-Perf ... SwopRYhWkf
I might eventually spring for it, pun intended. I think my front forks can be rebuilt, but the shock has been ridden hard for 14k miles with a lot of load.
-
- Member
- Posts: 7
- Joined: Wed Jun 05, 2019 7:21 pm
- Location: New York
Thank you for the link! How easy is it to adjust the preload on this shock? Is it something I could easily change before riding with a passenger? I assume I would need the right size spanner wrench?DeeDee wrote:Here is an adjustable 280mm Forsa. Great shock, made in Taiwan. https://www.ebay.com/itm/GY6-FORSA-Perf ... SwopRYhWkf
- DeeDee
- Member
- Posts: 1105
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
Genuine uses a Forsa on the 170i, but it is not this one. The stock 170i shock has no adjustment. This is a much better shock. It comes with a wrench to change the load settings. It is fairly easy to do once it is on the scooter. 280mm is 11" long. That's a lot of travel. This shock would be a good upgrade for a stock 125 or 150. I doubt you would need to change the setting on this once you get it set for two-up. My last two big bikes were adjusted for two riders. I didn't have a problem when I was on my own.
-
- Member
- Posts: 7
- Joined: Wed Jun 05, 2019 7:21 pm
- Location: New York
DeeDee, I ended up purchasing the shock and have installed it on my bike. Fits perfectly, performance seems improved! However, it didn't come with the spanner wrench needed to adjust preload. Any idea on what size spanner I need? Thanks!DeeDee wrote:Genuine uses a Forsa on the 170i, but it is not this one. The stock 170i shock has no adjustment. This is a much better shock. It comes with a wrench to change the load settings. It is fairly easy to do once it is on the scooter. 280mm is 11" long. That's a lot of travel. This shock would be a good upgrade for a stock 125 or 150. I doubt you would need to change the setting on this once you get it set for two-up. My last two big bikes were adjusted for two riders. I didn't have a problem when I was on my own.
- Stanza
- Member
- Posts: 575
- Joined: Mon Jan 29, 2018 8:34 pm
- Location: Chicago
mnika wrote:I have channel locks so I'll give those a go! But the screw driver and mallet idea seems solid too.
It looks like there's two rings at the bottom of the shock. I assume one is essentially a locking ring?
Exactly. So you tighten the top ring to where you'd like the preload set, and then you tap the lower ring till it locks in and secures the top ring.
- PistolPete7390
- Member
- Posts: 24
- Joined: Wed May 03, 2017 1:14 am
- Location: Manchester NH
DeeDee is this the same shock. Wasn't successful with the ebay link.
http://www.scootertronics.com/forsa-racing-shock.html
http://www.scootertronics.com/forsa-racing-shock.html
- DeeDee
- Member
- Posts: 1105
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
Here are two rear shock options I just came across. I'd snap up the YSS before the seller realizes $3.74 won't ship from Italy to the US.
https://www.ebay.com/itm/YSS-Rear-Shock ... Sw7mNcgPz7
I'm not a fan of YSS. The one time I tried YSS on the rear of my C3, it blew out in less than 3 months.
These look interesting. Two for one money. https://www.ebay.com/itm/Black-Shorty-M ... OSwNvxa0nu~
Both of these are 3/8" longer than your stock shock. This will not effect anything.
https://www.ebay.com/itm/YSS-Rear-Shock ... Sw7mNcgPz7
I'm not a fan of YSS. The one time I tried YSS on the rear of my C3, it blew out in less than 3 months.
These look interesting. Two for one money. https://www.ebay.com/itm/Black-Shorty-M ... OSwNvxa0nu~
Both of these are 3/8" longer than your stock shock. This will not effect anything.
-
- Member
- Posts: 509
- Joined: Sun Jan 11, 2015 9:36 pm
- Location: North SF Bay
I'm sorry to hear about the failure of your YSS shock.
I have had a YSS on my 170i for about 10K miles. It can be adjusted to provide 10mm of static sag that really helps the ride and performance overall. I've had YSS shocks on other bikes and find them to be a quality piece at a bargain price.
I have had a YSS on my 170i for about 10K miles. It can be adjusted to provide 10mm of static sag that really helps the ride and performance overall. I've had YSS shocks on other bikes and find them to be a quality piece at a bargain price.
'09 Yamaha TMAX Large sport scoot.
- babblefish
- Member
- Posts: 3118
- Joined: Tue Dec 04, 2007 8:42 am
- Location: San Francisco
-
- Member
- Posts: 37
- Joined: Fri Jul 27, 2018 6:44 pm
- Location: SD
Any ideas if this guy will fit my Buddy 170i?
https://www.ebay.com/itm/11-280mm-Rear- ... 2106!US!-1
https://www.ebay.com/itm/11-280mm-Rear- ... 2106!US!-1
- buzzvert
- Member
- Posts: 150
- Joined: Sun Jul 28, 2019 11:44 pm
- Location: Longmont, CO
I like this one, have it on all 3 of my buddy 125s:
https://www.ebay.com/itm/11-Forsa-Perfo ... 2693127048
https://www.ebay.com/itm/11-Forsa-Perfo ... 2693127048
- DeeDee
- Member
- Posts: 1105
- Joined: Sat Jul 26, 2014 5:07 pm
- Location: Denver
I just found this. $46.00 for an adjustable forsa: https://www.ebay.com/itm/Yamaha-Zuma-20 ... SwRxFaI3JM
-
- Member
- Posts: 37
- Joined: Fri Jul 27, 2018 6:44 pm
- Location: SD
- JettaKnight
- Member
- Posts: 671
- Joined: Thu Mar 29, 2007 2:19 am
- Location: Fort Wayne