Forums
 FAQHelp  LinksLinks    SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Malossi Wild Lion Exhaust for Roughhouse does not fit

 
Post new topic   Reply to topic    Forums » Black Cat, Rattler & Roughhouse Discussion Previous topic :: Next topic  
Author Message
catman
Member


Joined: 30 Oct 2019
Posts: 6
Location: 28025
roughhouse

PostPosted: Tue Nov 19, 2019 4:52 am    Post subject: Malossi Wild Lion Exhaust for Roughhouse does not fit Reply with quote

I purchased a 70cc BBK for my Roughhouse which includes a Malossi Wild Lion Exhaust. It is supposed to work with stock 50cc or mild 70cc BBK. I decided to install on my stock motor, re-jet and run it this way for awhile. The bracket is welded on and has all holes as stock but the mounting holes do not line up. The spacing is off. The holes in the exhaust bracket are too far forward and the bracket is hitting the plastic shroud on the motor. I am being told that this pipe fits both the Buddy and the Roughhouse. It may fit the Buddy but it does not fit the Roughhouse, not even close.
Back to top
View user's profile Send private message  
Stanza
Member


Joined: 29 Jan 2018
Posts: 494
Location: Chicago
Puch Maxi, Honda C70

PostPosted: Tue Nov 19, 2019 3:23 pm    Post subject: Reply with quote

Can you post a picture of the mismatch?
Back to top
View user's profile Send private message  
catman
Member


Joined: 30 Oct 2019
Posts: 6
Location: 28025
roughhouse

PostPosted: Wed Nov 20, 2019 8:26 pm    Post subject: Malossi exhaust mounting holes not lining up Reply with quote

The holes in the exhaust bracket are well forward of the mounting holes on the Roughhouse. This is with the header flange attached to the cylinder studs but not tightened down. the bracket on the exhaust is contacting the plastic fan shroud.
Back to top
View user's profile Send private message  
Stanza
Member


Joined: 29 Jan 2018
Posts: 494
Location: Chicago
Puch Maxi, Honda C70

PostPosted: Mon Dec 02, 2019 2:53 pm    Post subject: Reply with quote

If the header tube isn't obviously bent, then somehow that exhaust has an improperly spaced mounting bracket. I can't remember whether the spacing is different for buddy vs roughhouse, but I would definitely contact the seller and issue a polite "um...what gives?"
Back to top
View user's profile Send private message  
Display posts from previous:   
Post new topic   Reply to topic    Forums » Black Cat, Rattler & Roughhouse Discussion Previous topic :: Next topic  Time: GMT

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

  Scootergear designed by riders for riders


Powered by phpBB © 2001, 2005 phpBB Group
All Content Copyright 2007-2011 by Modern Buddy. All Rights Reserved.