My 2019 Buddy 125 with 350 miles has a buzzing vibration in the upper instrument speedo cluster area at light throttle opening.
Seems to be two panels or components not well separated and vibrating against each other.
Are most Buddy's like this?
Or anyone else been down this road before?
Thanks.
Buzziness in steering cluster
Moderator: Modern Buddy Staff
-
- Member
- Posts: 111
- Joined: Wed Dec 05, 2018 7:58 pm
- Location: Charleston
-
- Member
- Posts: 277
- Joined: Fri Sep 17, 2010 11:36 pm
- Location: Albany, NY
I've had some vibration in a panel or two depending upon RPMS. I used the same sound deadening material you use in automobiles to dampen road noise or control vibration and resonations from sound systems. Just applied it to the back of the affected panels. You don't even need to cover the entire back of the panel.
-
- Member
- Posts: 111
- Joined: Wed Dec 05, 2018 7:58 pm
- Location: Charleston
- Stanza
- Member
- Posts: 575
- Joined: Mon Jan 29, 2018 8:34 pm
- Location: Chicago
The headset covers are held together by four screws on the bottom cover, the headlight ring (single screw at the top of the chrome ring) and plastic snaps tabs. Be careful when disconnecting the ones near the brake levers, they like to snap and then your covers will have a slight gap where those tabs used to be.
-
- Member
- Posts: 111
- Joined: Wed Dec 05, 2018 7:58 pm
- Location: Charleston
-
- Member
- Posts: 8
- Joined: Thu Dec 26, 2019 2:24 am
-
- Member
- Posts: 111
- Joined: Wed Dec 05, 2018 7:58 pm
- Location: Charleston