The Buddys (and other PGO/Genuines) are as well.Spannerx wrote:I don't know about any other manufacturers, but I do believe that Yamaha does it that way.PeteH wrote:Wait a sec.... Don't we have mirror stems with left-handed _and_ right-handed threads???
How to tighten mirror?
Moderator: Modern Buddy Staff
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- PeteH
- Member
- Posts: 2281
- Joined: Mon Jan 17, 2011 4:32 pm
- Location: 3603mi SE of Dutch Harbor
I haven't had to futz with mine yet, but in the windshield installation PDF in the library ( http://www.modernbuddy.com/pdf/buddywindshield.pdf ) there's mention of SX and DX bolts, which I take to mean sin and dex, or left and right threaded.
Guess I should wrench and see.
Guess I should wrench and see.
Re: Lefties
Except that the threads go the opposite way, which cancels that out.bluebuddygirl wrote:Because when the wind pushes on the mirror on the left it unscrews it, where as on the right side it holds it tight. So simple, but so true.
- bluebuddygirl
- Member
- Posts: 880
- Joined: Sat Sep 20, 2008 1:34 am
- Location: Akron, OH
-
- Member
- Posts: 11
- Joined: Mon Apr 19, 2010 4:51 pm
- Location: Chicago
I remembered this thread this morning on my way to work, when my left mirror first started wobbling, very loose at the swivel part on top.
Then on my way home after work before I even had a chance to search out the thread, off popped the mirror (yes, the left one) and away it rolled away into oncoming traffic. DOA.
I feel sort of bad making a warranty claim on it (one-year-old Buddy 1200 miles), given the bumpy commute I have every day but someone earlier mentioned a $20 replacement. Does anyone know where I can find that? All I see is the pair for $54. If I'm only given the choice of buying the pair, I'll request warranty replacement.
Then on my way home after work before I even had a chance to search out the thread, off popped the mirror (yes, the left one) and away it rolled away into oncoming traffic. DOA.
I feel sort of bad making a warranty claim on it (one-year-old Buddy 1200 miles), given the bumpy commute I have every day but someone earlier mentioned a $20 replacement. Does anyone know where I can find that? All I see is the pair for $54. If I'm only given the choice of buying the pair, I'll request warranty replacement.
-
- Member
- Posts: 121
- Joined: Sat Nov 13, 2010 5:58 pm
- Location: All over
I remembered the gist of this thread when the right hand mirror swivel got loose on dear Wife's MB 150. My solution was a bit different in that I used a soap solution (dish wash detergent) in a spray bottle and soaked everything liberally. Flat screwdriver blade and fingernails got the rubber out with the mirror following. 8mm nut removed and LOCTITE red on the threads followed by snugging nut for friction. Put the black "rubber" thingy on the glass and gently pushed it back into the metal back. Went back in easier than out! Thanks to all of YOU here I am now waiting for the left one to get sloppy!
Karl
Karl
-
- Member
- Posts: 1329
- Joined: Sat Nov 07, 2009 12:22 am
- Location: Maryland
Since my last attempt with left mirror ended up badly (thankfully the new one was already on it's way from scooterloungeonline) I decided not to mess with the righ side mirror and using mucho tape instead. My dealer says he ordered right mirror form Scooterworks but they were out for a while (back ordered) and its has been good 3 weeks.
With the left mirror when I did get to the bolt the reason I could not remove the mirror like everyone else here was able to is because it had tons of that gel glue under it. It just was not coming out in one piece. So it is tape for now. Not the best solution but hopefully at some point I will get replacement and then look for something that has bolts on the outside.
With the left mirror when I did get to the bolt the reason I could not remove the mirror like everyone else here was able to is because it had tons of that gel glue under it. It just was not coming out in one piece. So it is tape for now. Not the best solution but hopefully at some point I will get replacement and then look for something that has bolts on the outside.
I am not a scooter snob.
I am a scooter connoisseur
I am a scooter connoisseur
- powerslave65
- Member
- Posts: 27
- Joined: Wed May 11, 2011 12:34 am
- Location: socal
I just did this and you really have to push the black rubber outwards towards the rim of the mirror back so the mirror can clear the rubber when being lifted out. The cuticle analogy is correct but I still managed to nick mine all to hell before everything was said and done. The mirror is nice and sturdy now though.
- Skootz Kabootz
- Member
- Posts: 4305
- Joined: Sat Nov 15, 2008 12:47 pm
- Location: West Hollywood, CA
- Contact:
You'll find now that you've done that mirror once, should it loosen again (make that when it loosens again), it will be much easier to push the rubber back the second time. It gets a bit easier with each time you do it. I just did one of mine again for about the fourth time. Takes me all of 3 minutes to finish the job now.powerslave65 wrote:I just did this and you really have to push the black rubber outwards towards the rim of the mirror back so the mirror can clear the rubber when being lifted out. The cuticle analogy is correct but I still managed to nick mine all to hell before everything was said and done. The mirror is nice and sturdy now though.
- afsmw516
- Member
- Posts: 6
- Joined: Wed Jul 27, 2011 6:27 am
- Location: Rome, GA & New Port Richey, FL
It worked! (Floppy Mirror Syndrome fix)
Many thanks to Olhogrider and SkootzKabootz for their step-by-step tutorial on how to tighten that nut behind the mirror. My goodness, it works! I just did it! If a late-50s, female, college music professor can do it, ANYONE CAN! (There's not a mechanical bone in my body, but I can sing real purty.)
BTW, it was my left mirror, too--someone commented on how it seems to be the left mirror more than the right.
What a great forum! I really appreciate the support and help, guys!
BTW, it was my left mirror, too--someone commented on how it seems to be the left mirror more than the right.
What a great forum! I really appreciate the support and help, guys!
"For what shall it profit a man, if he shall gain the whole world, and lose his own soul?" ~ Mark 8:36
- afsmw516
- Member
- Posts: 6
- Joined: Wed Jul 27, 2011 6:27 am
- Location: Rome, GA & New Port Richey, FL
AAARGH! Again!
So no sooner do I successfully tighten the left mirror, than the right one goes the same route--hangin' like a limp dishrag. I did the right one just now, 24 hours after doing the left one--let's hope this does the trick for longer than a few days!
"For what shall it profit a man, if he shall gain the whole world, and lose his own soul?" ~ Mark 8:36
-
- Member
- Posts: 1329
- Joined: Sat Nov 07, 2009 12:22 am
- Location: Maryland
- pcameronbrooks
- Member
- Posts: 46
- Joined: Mon Jun 27, 2011 4:50 pm
- Location: Yakima, WA
- Diblit
- Member
- Posts: 53
- Joined: Wed Jun 20, 2012 5:03 pm
- Location: Cincinnati, OH
olhogrider....saw your pic and laughed!! so, i thought i'd show you what's on my buddy.....only hangs on with a magnet, but has stayed on at 50mph!!
buddy troll by diblit, on Flickr[/img]
buddy troll by diblit, on Flickr[/img]
- jd
- Member
- Posts: 206
- Joined: Sun Aug 07, 2011 8:08 pm
- Location: Cincinnati/Northern Kentucky
Yep, this is an old thread but it's a gift that keeps on giving. Was just about to order a new LH mirror for my Buddy 125, due to the looseness between the mirror and the stem, when I stumbled across yet another invaluable tidbit on Modern Buddy. Five minutes later, I have a tight mirror assembly and a feeling of accomplishment. I used a thin screwdriver and my thumbnail to push back the mirror "cuticle" and the kitchen counter to re-seat the mirror and gasket.
And I saved 30 bucks, too!
And I saved 30 bucks, too!
Some people are like slinkies. They're not very interesting, but they bring a smile to your face when you push them down the stairs.
-
- Member
- Posts: 360
- Joined: Wed Sep 24, 2014 12:21 am
- Location: Minnesota
I recently had this problem with my left mirror hanging limply at the connection to the stalk. Here's my experience: It took quite a while to ever so carefully push the black rubber gasket surrounding the mirror, back into the housing. I used a tiny screwdriver (the kind to tighten glasses) and even with that I chipped some of the mirror edges. After getting that gasket pushed back, the mirror was very difficult to get out. When I finally did, using a suction cup to manipulate it, I noticed that it was securely glued to the interior housing by two large goops of silicone. Some people report they had no silicone and that the mirror came out easily. After tightening the 8 mm nut, I sadly split the mirror putting it back in. This was my fault. Next time I would use the method mentioned above about placing the mirror on a table. I went out and bought a 4 inch mirror at the store for $1.49. It was too big. I attached it anyway, with glue, etc.. How naive. I did not realize that a hand mirror is for close up objects, so it did not work well on a scooter; things were blurry. I will reinstall my split mirror for now.
It isn't often that nut needs to be tightened, but I think the design should accommodate that occasional need. It's wasteful to throw out a whole mirror setup because of one loose nut. I could not find a way to contact Genuine to ask if I could buy just the mirror. I think now I could install it without breaking it.
It isn't often that nut needs to be tightened, but I think the design should accommodate that occasional need. It's wasteful to throw out a whole mirror setup because of one loose nut. I could not find a way to contact Genuine to ask if I could buy just the mirror. I think now I could install it without breaking it.
- jd
- Member
- Posts: 206
- Joined: Sun Aug 07, 2011 8:08 pm
- Location: Cincinnati/Northern Kentucky
Better yet, just replace it with this.
I replaced both sides with these and they are superior in every possible respect. Much better rearward vision and better build quality. Have never had mirror problems again since.
I replaced both sides with these and they are superior in every possible respect. Much better rearward vision and better build quality. Have never had mirror problems again since.
Some people are like slinkies. They're not very interesting, but they bring a smile to your face when you push them down the stairs.
- jd
- Member
- Posts: 206
- Joined: Sun Aug 07, 2011 8:08 pm
- Location: Cincinnati/Northern Kentucky
Absolutely no adaptations. Same thread. Just screw it in.
Here's the one for the right side.
Wished I had done it much sooner. Always hated those tiny Buddy mirrors.
Here's the one for the right side.
Wished I had done it much sooner. Always hated those tiny Buddy mirrors.
Some people are like slinkies. They're not very interesting, but they bring a smile to your face when you push them down the stairs.