Crankcase seals removal 2t

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
milly
Member
Posts: 75
Joined: Sun Nov 26, 2017 9:31 am
Location: U.K.

Crankcase seals removal 2t

Post by milly »

Bit confused on this one. I know flywheel side seal can be replaced easily but can the clutch side after removing clutch or is it a case of splitting the cases. Was not sure if seal was on inside behind the bearing.
Thanks in advance.
mjrally
Member
Posts: 31
Joined: Fri Feb 03, 2012 2:27 am
Location: Oceanside, CA

Re: Crankcase seals removal 2t

Post by mjrally »

Sorry but you'll have to split the cases for the clutch side seal.
milly
Member
Posts: 75
Joined: Sun Nov 26, 2017 9:31 am
Location: U.K.

Re: Crankcase seals removal 2t

Post by milly »

mjrally wrote: Sun Dec 06, 2020 9:46 pm Sorry but you'll have to split the cases for the clutch side seal.
Thanks for that info thought that would be the case.
I drained the gearbox oil and no stink of petrol in with the oil or oil loss so looks like clutch side maybe ok. Get on with the rest of checking when I get time.
Thanks again.
Post Reply