Read this if your thinking about buying a rattler 110
Moderator: Modern Buddy Staff
Read this if your thinking about buying a rattler 110
ok i was leaning forwards on this!
http://www.youtube.com/watch?v=c8MNo4-o_SQ
not exactly fair as its tuned but you can get similar results with a pipe and rollers.
http://www.youtube.com/watch?v=c8MNo4-o_SQ
not exactly fair as its tuned but you can get similar results with a pipe and rollers.
- brimstone
- Member
- Posts: 446
- Joined: Sun Mar 30, 2008 2:07 pm
- Location: Juneau, Alaska
nice....i like your paint job too. looks sweet.
<a href="http://www.fuelly.com/driver/brimstone/rattler-110" target="_blank"><img src="http://www.fuelly.com/sig-us/20736.png" width="500" height="63" alt="Fuelly" title="Share and compare MPG at Fuelly" border="0"/></a>
thanks, i was looking for a painter in taiwan to do a job to match my helmet, but then i found a yamaha cygnus decal sheet which had the very same pattern!.
so its not paint but decals, been layed on as best as those little taiwanese hands can but its not 100% perfect.
kinda cheeky as PGO build some yamahas and made the BWS and im using yamaha stickers on my PGO.
so its not paint but decals, been layed on as best as those little taiwanese hands can but its not 100% perfect.
kinda cheeky as PGO build some yamahas and made the BWS and im using yamaha stickers on my PGO.
- MPA
- Member
- Posts: 187
- Joined: Fri May 09, 2008 2:34 am
- Location: St Louis, MO
im just over 160 myself, either use just 8g rollers all around or use a mixture of 8 and 9.wheelies wrote:shoot, I'm about 160. Where can I get the rollers are are they a special size?nissanman wrote:8g should work better. I've tried 11, 10, 9 (stock), 6.5, and I'm running 8.25 now (combo of 6.5s and 10s). I'm going to put some 8g sliders in there soon. I weigh 200lbs +/- depending on gear etc.
but im unsure of your motors tune, mine has been ported and hand polished, the porting was for lower down peak power (i thought it was for higher rpm but turns out my chinese was wrong and its lower rpm!) so 8g is perfect.
has your carb been rejetted to suit that exhaust?