How'd I break that?

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
User avatar
nissanman
Member
Posts: 1209
Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT

How'd I break that?

Post by nissanman »

Funny thing tonight. I found out two things. 1 is that the Rattler does appear to have a rev limiter. On a downhill I can get 60+ out of it, but on a flat tonight it hit 57 and hit a "wall". Weird. 2 is that I broke the bracket that holds the rear tire hugger on (on the exhaust side). While doing my high speed run it started to make an awful noise, I thought I may have lost an exhaust nut or something. Get home and notice the hugger is loose and the bracket is broken :shock: Oh well, I'll run it hugger-less for now until I make a new bracket.
EZPZ #65
User avatar
KABanshee
Member
Posts: 142
Joined: Sun Apr 13, 2008 5:07 am
Location: Vancouver

Post by KABanshee »

Stinkin rev limiter, must be a way to get past it if you ever decide to punch her out a little.

What is it that you are referring to as the hugger Dan?
"Hey Little Buddy" - Jonas Grumby
User avatar
nissanman
Member
Posts: 1209
Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT

Post by nissanman »

The rear fender that sits about 1/4" over the rear tire.
EZPZ #65
User avatar
Eazy
Member
Posts: 461
Joined: Sat May 17, 2008 12:45 am
Location: Idaho Falls, ID

Post by Eazy »

time for a new CDI box eh?
User avatar
nissanman
Member
Posts: 1209
Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT

Post by nissanman »

Probably. First the jet, then some 8g sliders... then CDI, Clutch w/bell??? And I've got some cosmetic plans for 'ol Bucky next month. Graphics :shock:
EZPZ #65
User avatar
Eazy
Member
Posts: 461
Joined: Sat May 17, 2008 12:45 am
Location: Idaho Falls, ID

Post by Eazy »

nissanman wrote:Probably. First the jet, then some 8g sliders... then CDI, Clutch w/bell??? And I've got some cosmetic plans for 'ol Bucky next month. Graphics :shock:
I haven't seen one yet but if polini makes a clutch for the rattler pick that pig up.

They grab super hard and are hella easy to adjust.
User avatar
brimstone
Member
Posts: 446
Joined: Sun Mar 30, 2008 2:07 pm
Location: Juneau, Alaska

Post by brimstone »

is that a true 60 or indicated? cause i've had mine an indicated 60 on flat ground.....i'm pretty sure i had a tail wind though. that might have something to do with it. :lol:
<a href="http://www.fuelly.com/driver/brimstone/rattler-110" target="_blank"><img src="http://www.fuelly.com/sig-us/20736.png" width="500" height="63" alt="Fuelly" title="Share and compare MPG at Fuelly" border="0"/></a>
User avatar
nissanman
Member
Posts: 1209
Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT

Post by nissanman »

Downhill was a true 60 (thanks Garmin), rev limiter was at an indicated 57.
EZPZ #65
Post Reply