Hauling the scooter
Moderator: Modern Buddy Staff
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
Hauling the scooter
I just put a hitch on my minivan and I am looking for options for hauling the scooter. I want to carry it on trips to visit family and ride it while I am there, but i have to haul the family as well.
Is anybody out there now hauling there scoot long distances, currently my only idea is to get a small trailer and tie it down. Any ideas would be appreciated, concerns, etc. How are you doing it if you are?
Is anybody out there now hauling there scoot long distances, currently my only idea is to get a small trailer and tie it down. Any ideas would be appreciated, concerns, etc. How are you doing it if you are?
- Perkussion
- Member
- Posts: 238
- Joined: Tue May 27, 2008 2:35 am
- Location: Pace, Florida
- Contact:
This is the first thing I came across when I googled motorcycle straps http://www.discountramps.com/motorcycle ... -downs.htm
Last edited by Perkussion on Sat Jun 28, 2008 12:21 am, edited 1 time in total.
- Johnny
- Member
- Posts: 106
- Joined: Fri Sep 21, 2007 9:38 pm
- Location: Chicago, IL
A small trailer is your best bet.
I own a Versa-Haul - which attaches to your hitch and hangs off the rear end. I totally destroyed my rear suspension transporting a motorcycle back from Michigan and one from Minnesota.
One of the best trailers I have used is the Trailer In A Bag. I just brought a motorcycle back from Minneapolis with no problems.
I own a Versa-Haul - which attaches to your hitch and hangs off the rear end. I totally destroyed my rear suspension transporting a motorcycle back from Michigan and one from Minnesota.
One of the best trailers I have used is the Trailer In A Bag. I just brought a motorcycle back from Minneapolis with no problems.
<b>2006 Buddy 125
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
My initial idea was to put one of the 2' X 5' trays that just hang supported by the vehicle. They are supposed to be good up to 500lbs (and the scooter was way under that). But when I opened it the very first line was "Do not put motorcycle or Scooter on this!".
My species usually ignores such warnings, but I wanted some backup.
BTW, that trailer in a bag looks awesome, but then I saw the cost (ouch)! Good link though.
My species usually ignores such warnings, but I wanted some backup.
BTW, that trailer in a bag looks awesome, but then I saw the cost (ouch)! Good link though.
Last edited by luckyleighton on Sat Jun 28, 2008 12:24 am, edited 1 time in total.
- Johnny
- Member
- Posts: 106
- Joined: Fri Sep 21, 2007 9:38 pm
- Location: Chicago, IL
As tempting as it may be, don't use one of those trailer hitch carriers that your Grandparents utilize to transport a tub of sweaters to their Summer home in Boca Raton.
Last edited by Johnny on Sat Jun 28, 2008 12:27 am, edited 1 time in total.
<b>2006 Buddy 125
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
- Perkussion
- Member
- Posts: 238
- Joined: Tue May 27, 2008 2:35 am
- Location: Pace, Florida
- Contact:
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
I think I have been convinced to drop the basket, there is a 5X5 wheeled trailer at a local HW store that may work. I would add some supports to it for the wheels, I may go that way.
Perkussion, I am coming your way on labor day (just FYI). I am from Pensacola and will be visiting my sisters family that weekend. So I am eyeballing that trip specifically.
Perkussion, I am coming your way on labor day (just FYI). I am from Pensacola and will be visiting my sisters family that weekend. So I am eyeballing that trip specifically.
- BigColdMartini
- Member
- Posts: 307
- Joined: Sun Jun 22, 2008 10:44 pm
-
- Member
- Posts: 22
- Joined: Tue Jun 24, 2008 9:07 pm
- Location: Raleigh
Hi all,
I'm curious about the arguments against the 2X5 luggage carrier. I called the company about this one:
http://www.drawtite-hitches.com/product ... ther,63153
and they told me it would be fine. In fact, I started a similar thread about transporting my buddy and the responses I got seemed to suggest that this would work - other than that it might be a pain getting it on and off.
I really like the idea because the rack is useful for other things. And, it costs about 10% of most of the trailers/motorcycle haulers I've seen.
So, still not clear to me why this wouldn't work. What am I missing?
I'm curious about the arguments against the 2X5 luggage carrier. I called the company about this one:
http://www.drawtite-hitches.com/product ... ther,63153
and they told me it would be fine. In fact, I started a similar thread about transporting my buddy and the responses I got seemed to suggest that this would work - other than that it might be a pain getting it on and off.
I really like the idea because the rack is useful for other things. And, it costs about 10% of most of the trailers/motorcycle haulers I've seen.
So, still not clear to me why this wouldn't work. What am I missing?
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
That what I was looking at...I bought one (not the exact one) and it had a warning on carrying scoots or motorcycles. It was undefined beyond that.
The guy earlier warned against based on suspension problems and I could see that with an unbalanced load on small vehicles (like mine). The warning may have been due to liability for securing the thing too. I wouldn't carry it unless I was confident it was secured. They are much reasonable in price though.
The guy earlier warned against based on suspension problems and I could see that with an unbalanced load on small vehicles (like mine). The warning may have been due to liability for securing the thing too. I wouldn't carry it unless I was confident it was secured. They are much reasonable in price though.
- Johnny
- Member
- Posts: 106
- Joined: Fri Sep 21, 2007 9:38 pm
- Location: Chicago, IL
The problem with carriers that attach to your hitch (as I understand it) is that it places a tremendous amount of strain on your rear suspension - as well as making your vehicle unstable.
Of course, all of this depends on your particular vehicle and its "tongue weight" rating.
To give you an example, I have a Land Rover Discovery. The tongue rating is about 500 pounds. After hauling a couple of 400 pound bikes a few times, my rear suspension was shot - resulting in a costly repair.
If you own a dump truck, you will likely be fine.
Of course, all of this depends on your particular vehicle and its "tongue weight" rating.
To give you an example, I have a Land Rover Discovery. The tongue rating is about 500 pounds. After hauling a couple of 400 pound bikes a few times, my rear suspension was shot - resulting in a costly repair.
If you own a dump truck, you will likely be fine.
<b>2006 Buddy 125
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
1974 Honda CB350F
1972 Honda CB350 Twin
1968 Honda S90
1965 Lambretta Li150
1975 Ford Bronco</b>
- hcstrider
- Member
- Posts: 308
- Joined: Mon Aug 06, 2007 5:07 pm
- Location: Ellicott City, MD
This railed cargo carrier has a rail surrounding the carrier’s floorboard and that rail would make it very difficult to load/unload your Buddy. On your previous thread about a different cargo carrier, I made some suggestioned modifications for making that cargo carrier more like a motorcycle/scooter carrier: install a wheel chock and some tie down points. Despite my suggestions, I can not recommend using these cargo carriers for carrying your scooter because I have no experience with them.wolfpackscooter wrote:Hi all,
I'm curious about the arguments against the 2X5 luggage carrier. I called the company about this one:
http://www.drawtite-hitches.com/product ... ther,63153
and they told me it would be fine. In fact, I started a similar thread about transporting my buddy and the responses I got seemed to suggest that this would work - other than that it might be a pain getting it on and off.
If I am transporting only one Buddy I use a VersaHaul hitch mounted carrier. I have the VersaHaul model VH-55 RO carrier. It costs about $300 dollar more that cargo carriers that you are looking at but it is a carrier that is designed specifically for transporting a scooter/motorcycle:
- It has its own ramp that makes it easy to load and unload the Buddy.
- It has scooter/motorcycle specific tie down points so that your scooter/motorcycle can be firmly secured to the carrier.
- It has a built in wheel chock which the front of the scooter/motorcycle can be secured against.
- It is a solidly built carrier, nothing rattles or clanks or makes any noise.
I concur with Johnny in that the vehicle that you are using to transport your Buddy has to be up to the task. I use a 30 foot RV. If I was using a smaller vehicle such as a minivan, I would not use a hitch mounted carrier like the VersaHaul because I don’t think that the frame/suspension of a smaller vehicle is designed to carry a scooter/motorcycle directly on a hitch. If you have a smaller vehicle, your best Buddy transporting method is a trailer.
Wayne
The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)
The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
I went ahead and bought that basket carrier on Saturday and tried it out. I drive a mini-van, so the hitch is maybe 8" off the ground. With the weight of the scooter and the natural decline of the basket it was only about 2" off the ground without moving. This will not work, the slightest bump will be causing havoc back there..
So I brought it back...I am now looking at a 6X5 trailer at Lowe's that sells for $300. I was planning on making some L type brackets to secure the wheels and some latch tie-downs to secure it.
This will work, I just wanted to avoid spending the extra $300.
So I brought it back...I am now looking at a 6X5 trailer at Lowe's that sells for $300. I was planning on making some L type brackets to secure the wheels and some latch tie-downs to secure it.
This will work, I just wanted to avoid spending the extra $300.
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
I have finally finished modding and using the trailer....it worked great. Its a $300 trailer from Lowes, with about $100 of extra hardware to stabilize the wheels.
I also carried a bike and a stroller on it, so it came in real handy. I drove it about 600 miles round trip, no hiccups...thank God.
I also carried a bike and a stroller on it, so it came in real handy. I drove it about 600 miles round trip, no hiccups...thank God.
- Attachments
-
- FILE0030.JPG (77.75 KiB) Viewed 5132 times
-
- FILE0034.JPG (74.39 KiB) Viewed 5129 times
-
- FILE0033.JPG (105.54 KiB) Viewed 5129 times
-
- Member
- Posts: 404
- Joined: Sun Jun 08, 2008 12:03 am
- Location: NW Suburbs of Chicago, IL
- ScootLemont
- Member
- Posts: 2526
- Joined: Fri Apr 11, 2008 6:20 pm
- Location: Lemont IL
- Contact:
What I would be worried about is the tounge weight of one of those
Class III hitches are made for a tounge weight of up to 500lbs.
With a 250lb scooter hanging off the back, the carrier works like a lever with the hitch as the fulcrum.
Driving along on a smooth road should be no problem with a class III but hit a pothole & I could easily see the the toung weight jump over 500lbs as the entire thing works like a lever.
Thats just my 2 cents
- I really like the idea of the hitch mounted carriers but am afraid of them for this reason - I am dealing with a trailer for transporting mine.
Class III hitches are made for a tounge weight of up to 500lbs.
With a 250lb scooter hanging off the back, the carrier works like a lever with the hitch as the fulcrum.
Driving along on a smooth road should be no problem with a class III but hit a pothole & I could easily see the the toung weight jump over 500lbs as the entire thing works like a lever.
Thats just my 2 cents
- I really like the idea of the hitch mounted carriers but am afraid of them for this reason - I am dealing with a trailer for transporting mine.
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
I will try and post more about parts when I can find links....
As for the carrier pic....I could see that working for some. But for me the tongue weight was too much. Also Carrying it with the minivan it only cleared the ground by like 2". That was not enough to make me feel safe. I bought one and tried it, but you need the right vehicle. Its not worth a mistake on the highway.
As for the carrier pic....I could see that working for some. But for me the tongue weight was too much. Also Carrying it with the minivan it only cleared the ground by like 2". That was not enough to make me feel safe. I bought one and tried it, but you need the right vehicle. Its not worth a mistake on the highway.
- olhogrider
- Member
- Posts: 1153
- Joined: Fri Jul 04, 2008 6:30 pm
- Location: Vegas Baby!
- ScootLemont
- Member
- Posts: 2526
- Joined: Fri Apr 11, 2008 6:20 pm
- Location: Lemont IL
- Contact:
I would guess that the class IV hitch would make a big difference - thats rated at 1,000 tounge weight
olhogrider wrote:I have one of those carriers for my son's dirt bike. It worked well on a lifted Jeep Wrangler. When I got a second bike I bought a cheap trailer. It has also hauled a dead Harley and a dead Vespa. Now I don't have a vehicle with a class IV hitch so I have to use the trailer.
- PasadenaSue
- Member
- Posts: 178
- Joined: Sun Mar 18, 2007 3:41 pm
- Location: Pasadena, CA
-
- Member
- Posts: 35
- Joined: Fri Jul 11, 2008 12:07 am
- Location: new orleans, louisiana
me too..............i have a honda element, i'm starting to wonder if i can just get a ramp and roll the buddy right into the element (with the back seats out) and tie it down inside....i've had a bicycle standing up inside the car a few times, and there are places to put tie downs...anyone ever try to fit a buddy inside an element???PasadenaSue wrote:>I will try and post more about parts when I can find links....
Yes, please! I have been trying to get an inexpensive trailer for months now and would love to know the parts needed to put this one together.
PasadenaSue
- olhogrider
- Member
- Posts: 1153
- Joined: Fri Jul 04, 2008 6:30 pm
- Location: Vegas Baby!
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL
- The trailer I bought was not on the internet, but it was like this one without the gate in the back and I bought it new from the local Lowes for $298
http://tinyurl.com/zn4wt
- I cut out a 6" piece of metal from the front so I could move the rear wheel out onto the bar a little to move the weight more in front of the axel.
- I cut a 2X6 to 14" (the length between my center stand and the rear wheel).
- I fastened two angle pieces I bought for about $5 a piece as
anchors to the 2X6. They were about 10" long and 2" on each side of the 90 degree bend. Unfortunately I could not find pictures on the internet of what I bought, but it was all stuff in the fastener department of Lowes or Home Depot. Just stock stuff by the L-Brakets and such.
- Then I took the wheel choke I bought, and measured the lengths to try and re-create it with bending some 2"X1/8" aluminum bar from Lowes. I think I bought like 4-6 ft of this bar for close to $10. This after market choke cost $50.
http://tinyurl.com/67kytb
- I forget exactly what it measured but I cut it at that length and then bent it and fastened it to the two angle pieces above and fastened some flat braces to it in order to keep ot sturdy.
- After I assembled my home made wheel choke I installed it onto the trailer arm using Two U Bolts. I used 1/4" bolts, nuts and washers to put the rest together.
- To insulate it from cutting the tires I bought a pool noodle (technical term, I really don't know what to call it but that) and cut it to fit and then duct taped the hell out of it to compress it more. I also added some to the edges I cut on the trailer.
- I covered the 2X6 with more duct tape, to round off the edges of the bolts I was using, but I probably did not need too. After I was done I took a can of Black Spray Paint and painted everything to match the trailer.
- Of course anyone towing anything like this will need some ratchet tie downs.
http://tinyurl.com/5lu7xb
- It worked well...I would like to widen my home made chock about 1" in order to get wheel a little more snug. It took probably 3 hours in all.
I will add some close up pictures of the hardware when I get home from work to this post.
To answer another question above, this trailer does not fold up and does take up space (about 5X5), and it is too heavy and long to hang anywhere. So urbanites beware.
http://tinyurl.com/zn4wt
- I cut out a 6" piece of metal from the front so I could move the rear wheel out onto the bar a little to move the weight more in front of the axel.
- I cut a 2X6 to 14" (the length between my center stand and the rear wheel).
- I fastened two angle pieces I bought for about $5 a piece as
anchors to the 2X6. They were about 10" long and 2" on each side of the 90 degree bend. Unfortunately I could not find pictures on the internet of what I bought, but it was all stuff in the fastener department of Lowes or Home Depot. Just stock stuff by the L-Brakets and such.
- Then I took the wheel choke I bought, and measured the lengths to try and re-create it with bending some 2"X1/8" aluminum bar from Lowes. I think I bought like 4-6 ft of this bar for close to $10. This after market choke cost $50.
http://tinyurl.com/67kytb
- I forget exactly what it measured but I cut it at that length and then bent it and fastened it to the two angle pieces above and fastened some flat braces to it in order to keep ot sturdy.
- After I assembled my home made wheel choke I installed it onto the trailer arm using Two U Bolts. I used 1/4" bolts, nuts and washers to put the rest together.
- To insulate it from cutting the tires I bought a pool noodle (technical term, I really don't know what to call it but that) and cut it to fit and then duct taped the hell out of it to compress it more. I also added some to the edges I cut on the trailer.
- I covered the 2X6 with more duct tape, to round off the edges of the bolts I was using, but I probably did not need too. After I was done I took a can of Black Spray Paint and painted everything to match the trailer.
- Of course anyone towing anything like this will need some ratchet tie downs.
http://tinyurl.com/5lu7xb
- It worked well...I would like to widen my home made chock about 1" in order to get wheel a little more snug. It took probably 3 hours in all.
I will add some close up pictures of the hardware when I get home from work to this post.
To answer another question above, this trailer does not fold up and does take up space (about 5X5), and it is too heavy and long to hang anywhere. So urbanites beware.
- Attachments
-
- finish2.JPG (67.32 KiB) Viewed 4873 times
-
- poolnoodle.jpg (27.7 KiB) Viewed 4873 times
-
- alumbar.jpg (29.31 KiB) Viewed 4873 times
-
- bracket.jpg (29.57 KiB) Viewed 4873 times
-
- finish1.JPG (69.36 KiB) Viewed 4873 times
Last edited by luckyleighton on Mon Jul 28, 2008 10:58 pm, edited 2 times in total.
- hcstrider
- Member
- Posts: 308
- Joined: Mon Aug 06, 2007 5:07 pm
- Location: Ellicott City, MD
That is a very nice trailer and a very informative write-up on the additions you made so that you could trailer your Rattler scooter. You should ask the Moderators if they will move this to the Technical Library.
Wayne
The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)
The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)
- luckyleighton
- Member
- Posts: 122
- Joined: Tue Jun 03, 2008 6:48 pm
- Location: Huntsville, AL