First all, thanks for all your help. I have found this one of the best all-around scooter advice forum.
Recently got my Honda PCX, and I want to remove the butt stop/bump. It unbolts easily enough, but I need a suggestion on how to cover/plug the holes that it bolts into. I'd like ti to be temporary/reversible.
The pics explain it all
NBR. Need some suggerstions for this seat mod..
Moderator: Modern Buddy Staff
- hal1
- Member
- Posts: 170
- Joined: Sat Aug 01, 2009 3:47 am
- Location: Chandler, AZ
- Syd
- Member
- Posts: 4686
- Joined: Wed Jul 18, 2007 6:41 am
- Location: Tempe
Re: NBR. Need some suggerstions for this seat mod..
No help, but doesn't that look like a face?
[/quote]
[/quote]
The majority is always sane - Nessus
- hal1
- Member
- Posts: 170
- Joined: Sat Aug 01, 2009 3:47 am
- Location: Chandler, AZ
Re: NBR. Need some suggerstions for this seat mod..
Further proof that the human brain can see faces in anything.Syd wrote:No help, but doesn't that look like a face?
Personally, I'd cover it with gaffer tape and call it good. Seriously. I have an entire bicycle seat covered in gaffer tape.
- hal1
- Member
- Posts: 170
- Joined: Sat Aug 01, 2009 3:47 am
- Location: Chandler, AZ
Re: NBR. Need some suggerstions for this seat mod..
TVB wrote:I like this even better. Even if it leaves marks when removed, they would be covered up by the stump bump if I put it back onSyd wrote:Personally, I'd cover it with gaffer tape and call it good. Seriously. I have an entire bicycle seat covered in gaffer tape.
- jmkjr72
- Member
- Posts: 783
- Joined: Sat Jul 11, 2009 11:07 pm
- Location: green bay wi
- Contact:
either that or get some headliner/interior buttons cover them with black leather and oput them in the holes and you can pop them out if you ever want to use the rest
http://contentinfo.autozone.com/znetcs/ ... 0/image/4/
http://contentinfo.autozone.com/znetcs/ ... 0/image/4/
- hal1
- Member
- Posts: 170
- Joined: Sat Aug 01, 2009 3:47 am
- Location: Chandler, AZ
That's what I was originally thinking. But(t) remember, I'm removing it so I can sit just a few inches further back. I'm going to see if Home Depot has anything that might work. I know they have something similar that you would use to plug a pipe, but once you get something to fill the hole, the cap end has to flange out enough to cover the materialjmkjr72 wrote:either that or get some headliner/interior buttons cover them with black leather and oput them in the holes and you can pop them out if you ever want to use the rest
http://contentinfo.autozone.com/znetcs/ ... 0/image/4/