I bought My stella a week ago.. battery was dead. i went to replace it but the battery salesman check it and shows 26% charged.. he told me that maybe the Stator or Regulator.. when he check shows 12.34V that the battery receives and not get charge. (shoud be 13 to 14)
what should i change?? Stator or regulator?
Genuine Stella 150 2t 2007 Stator or regulator?
Moderator: Modern Buddy Staff
-
- Member
- Posts: 3
- Joined: Wed Apr 24, 2013 8:55 pm
- PeteH
- Member
- Posts: 2281
- Joined: Mon Jan 17, 2011 4:32 pm
- Location: 3603mi SE of Dutch Harbor
Battery was dead today, or last week when you bought the scoot?
If that's the original battery, you might be due for a replacement. I'd try getting it charged and keeping an eye on it for a few days before replacing chunks of the charging system.
If that's the original battery, you might be due for a replacement. I'd try getting it charged and keeping an eye on it for a few days before replacing chunks of the charging system.
Feel da rhythm! Feel da rhyme! Get on up! It's Buddy Time!
-
- Member
- Posts: 3
- Joined: Wed Apr 24, 2013 8:55 pm
Hi it's not original battery, the guy who sold me the Stella told me that the battery it's ok.. needs to be charged.
today when i went to Battery Store they check it and the batt just receive from the Voltage Regulator 12.3 V. and sales rep, told me that maybe dont need to replace the batt, maybe need to replace the voltage regulator or Stator
today when i went to Battery Store they check it and the batt just receive from the Voltage Regulator 12.3 V. and sales rep, told me that maybe dont need to replace the batt, maybe need to replace the voltage regulator or Stator
- DCUNITED4LIFE
- Member
- Posts: 152
- Joined: Tue Sep 07, 2010 8:55 pm
- Location: Richmond Old Dominion
Hook a multi-meter up to your battery then rev the bike. If the voltage regulator is bad the voltage will shoot way above the 13-14 volts it should be at. Here is a youtube video to explain.
http://www.ehow.com/video_4874557_test- ... lator.html
http://www.ehow.com/video_4874557_test- ... lator.html
-
- Member
- Posts: 31
- Joined: Tue Jun 04, 2013 11:59 pm
- Location: Phoenix, AZ