40 psi tire pressure.
Moderator: Modern Buddy Staff
-
- Member
- Posts: 34
- Joined: Tue Nov 27, 2012 7:57 am
- Location: Dallas, Texas
40 psi tire pressure.
I was wondering how many people are still running at the higher than 30 psi tire pressures and what the results have been
-
- Member
- Posts: 34
- Joined: Tue Nov 27, 2012 7:57 am
- Location: Dallas, Texas
Stoney rs
Thanks for the info. I'm about 20 days away from having my down payment. The bank has dropped their interest requirements. I'll still have to test one out to see if I can duck walk it. I'm hoping that it will be light enough for me to move around in my bumpy compound angled apartment parking lot. My inseam is a bit on the short side but I'm kind of wide butted. I think with some large heeled boots, and at worst a seat shave I can make it work.
-
- Member
- Posts: 34
- Joined: Tue Nov 27, 2012 7:57 am
- Location: Dallas, Texas
Well I weigh about 240 lbs. So even with a 29 1/2 inch inseam the scoot should settle a bit when I sit down. I got sick for a while and couldn't handle my Ninja 250r, but I've had my throat cut on, and I'm feeling better, though I picked up an extra 25 pounds.
One of the reasons I'm looking for something in the 200 cc and larger, is to haul the flab 25 miles round trip to the Dojo about three times per week. I don't do gyms for exercise or at home. Just can't motivate.
The bad news is that the closest Genuine dealer is also a Vespa dealer.
One of the reasons I'm looking for something in the 200 cc and larger, is to haul the flab 25 miles round trip to the Dojo about three times per week. I don't do gyms for exercise or at home. Just can't motivate.
The bad news is that the closest Genuine dealer is also a Vespa dealer.
-
- Member
- Posts: 56
- Joined: Wed Aug 17, 2011 7:31 pm
- Location: New york
Im 260 with 30' inseam, the bike will seam a little tall at first till springs are broken in. And high tire pressure may make ride a bit stiff till broken in. And yes the bike is a bit heavy for it size, but that just make it feel more like a motorcycle on the hywy. The weight on the front wheel gives it a nice balanced feel very reasuring.
-
- Member
- Posts: 34
- Joined: Tue Nov 27, 2012 7:57 am
- Location: Dallas, Texas
The Ninja 250r and the Blur are pretty close in weight if I recall correctly. The center of gravity for the Blur is a lot lower though. I'm also looking forward to not having to constantly row through the gears for city driving and having to wait for those lean running carbs on the Ninjette to warm up.
- Rush
- Member
- Posts: 89
- Joined: Wed Mar 30, 2011 1:58 am
- Location: Cincinnati, OH
I've noticed that if I scoot all the way up to the front of the seat the scooped out portions of the sides of the seat help get my foot down easier. The Blur like most others seems to be most firmly planted if you just get one foot down and learn to lean the bike ever so gently to the left when approaching a stop and get that one down. Best thing is no foot pedals to worry about.
Knowing a couple of folks who have shaved down the seat - I'd highly recommend against any alterations of any kind.
Oh and I'm a big supporter of the 40psi. Quicker acceleration, 76 mpg (in Blur miles - which on mine seems to be about 7% optimistic) which equals 71 mpg real world. Takes a little getting used to - nimble and a little jumpy but much better than a 550 pound, $10k, road couch.
For What its Worth!
Knowing a couple of folks who have shaved down the seat - I'd highly recommend against any alterations of any kind.
Oh and I'm a big supporter of the 40psi. Quicker acceleration, 76 mpg (in Blur miles - which on mine seems to be about 7% optimistic) which equals 71 mpg real world. Takes a little getting used to - nimble and a little jumpy but much better than a 550 pound, $10k, road couch.
For What its Worth!
-
- Member
- Posts: 34
- Joined: Tue Nov 27, 2012 7:57 am
- Location: Dallas, Texas
Had a brush from the dark side. I emailed the local Genuine dealer and asked he knew anybody local that could shave and recover a seat. He said his customers had some good luck with Boss Hogg Custom Motorcycle Seats:
http://texasharleyseats.com/
Anyway since I had mentioned what I wanted a scooter for, he brought up the Piaggio BV 350.....Get thee behind me!
http://texasharleyseats.com/
Anyway since I had mentioned what I wanted a scooter for, he brought up the Piaggio BV 350.....Get thee behind me!