Ok so here are the pictures of my new "to me " 09 St tropez
It just got here from superseagulls FROM FL to Chicago
And I finally opened it all up to see what was wrong with the engine after 13k miles on it. I bought the scooter knowing it was bad so compression testing ... = 0psi so opened up the head and to my surprise 1 bent valve to start " intake
Alright what did that to do the piston ?
OH WOW..
That cant be cracked in 1/2 ....
No wait yes it can.. WOW
So what should I do ?
Should I rebuild the motor as stock....
OR
Should I rebuild something crazy like a 171 or 180cc?
Right now I need a new head, jug, cam, and piston plus all the gaskets ..
SO I guess I am ready for a cylinder upgrade.
My new Buddy With question!
Moderator: Modern Buddy Staff
- Throwback7R
- Member
- Posts: 317
- Joined: Thu Aug 16, 2012 1:29 pm
- Location: IL
- Throwback7R
- Member
- Posts: 317
- Joined: Thu Aug 16, 2012 1:29 pm
- Location: IL
after talking to the scooter works guys. looks like the 61mm Piston and Jug will be installed
http://www.scooterworks.com/ncy-61mm-cy ... age_id=153
and the high flow head with the performance cam..
Now just to wait .
http://www.scooterworks.com/ncy-61mm-cy ... age_id=153
and the high flow head with the performance cam..
Now just to wait .
- Throwback7R
- Member
- Posts: 317
- Joined: Thu Aug 16, 2012 1:29 pm
- Location: IL