OLDEST BUDDY HERE 87 PGO STAR 50!

Scooter and Rally Pictures and Videos

Moderator: Modern Buddy Staff

Post Reply
87PGOSTAR50GUY
Member
Posts: 81
Joined: Thu Jan 07, 2016 2:50 am
Location: Seattle, WA

OLDEST BUDDY HERE 87 PGO STAR 50!

Post by 87PGOSTAR50GUY »

THROW BACK PICTURES AND REVIVAL! PGO STAR 50

Slow editation

Running on updated piston style dish to dome, exhaust gasket still needed and fine air fuel mixture adjustment.



https://drive.google.com/file/d/0B-GFpW ... t_api[url]
Attachments
IMG_20151020_092944_opt.jpg
IMG_20151020_092944_opt.jpg (22.98 KiB) Viewed 865 times
Cleaned up found a sleeve skirt lower chip outside the ring land range did not want to use it,  but seems to run fine.
Cleaned up found a sleeve skirt lower chip outside the ring land range did not want to use it, but seems to run fine.
Screenshot_2015-10-12-15-35-15_opt-1.png (67.16 KiB) Viewed 864 times
Old jug with new piston from dished to dome top style.
Old jug with new piston from dished to dome top style.
IMG_20150101_012802_opt.jpg (23.18 KiB) Viewed 864 times
New carb updated specs type, 19mm intake side 42-43mm bolt mounting style 35mm air filter mount. KEIHIN JAPAN COPPY.
New carb updated specs type, 19mm intake side 42-43mm bolt mounting style 35mm air filter mount. KEIHIN JAPAN COPPY.
IMG_20160126_102030_opt.jpg (22.95 KiB) Viewed 864 times
Old carb too outdated TK JAPAN CARB had gaskets and full kits but no use in fixing a unfindable piece of crap carb.
Old carb too outdated TK JAPAN CARB had gaskets and full kits but no use in fixing a unfindable piece of crap carb.
IMG_20150909_095915_opt-1.jpg (26.36 KiB) Viewed 863 times
Last edited by 87PGOSTAR50GUY on Sat Jan 30, 2016 10:09 pm, edited 3 times in total.
User avatar
Drum Pro
Member
Posts: 1163
Joined: Thu Sep 01, 2011 4:03 am
Location: Victorville, Ca.

Post by Drum Pro »

Nice
87PGOSTAR50GUY
Member
Posts: 81
Joined: Thu Jan 07, 2016 2:50 am
Location: Seattle, WA

Post by 87PGOSTAR50GUY »

Drum Pro wrote:Nice

Takes look at the latest clip from my drive, I have a tiny bit of more work to do for the engine aspect paint i plan to strip the nose top chrome paint the top and the edges, strip the outer edge on the rear fenders chrome that little back add some paint 3 tone the rims and wheels red gold and white


Center piece red edges white with the rim lip chromed.


As far as the body goes tail light has to go need a solid screw in light on the rear, adding rear clearance blinkers as an addition to the turn signals.

Clay fiber glass the old turn signals in the front and update the side markers for flashiness.


Kind of wish i can have someone pre photo shop my scoot.
Post Reply