Trick to align splines on crankshaft with belt in way?

Discussion of the Genuine Buddy, Hooligan, Black Jack and other topics, both scooter related and not

Moderator: Modern Buddy Staff

Post Reply
babychipmunk94
Member
Posts: 1
Joined: Mon Oct 16, 2017 12:57 am

Trick to align splines on crankshaft with belt in way?

Post by babychipmunk94 »

I think rattling in my CVT is caused by misalignment on my crankshaft. Right now the belt that sits between the variator and the fan is wide and pushes all the nuts further out then they should be. The teeth are not over the teeth and instead are over the threads.

Does anyone have any tricks on how to get around this tight belt? I've seen videos on squeezing the clutch plates so that the belt loosens on the variator side, then screwing in the plates after that. Is this the best way to do it? Or should I take off the clutch assembly entirely?
Post Reply