150cc 2t jet sizes

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
milly
Member
Posts: 75
Joined: Sun Nov 26, 2017 9:31 am
Location: U.K.

150cc 2t jet sizes

Post by milly »

I am in the process soon of replacing my derestricted 125cc U.K. version with what appears to be a sito + exhaust prior to my ownership.

I have a standard 150 head and barrel to replace the 125 with and wondered if anyone can give me the jets sizes I will need to start off with as I have found conflicting reports on sizes. I will be using the spaco 20/20 that came with the scooter.
Many thanks in advance
Attachments
C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_22448408_10155772144559496_585237245757730819_n.jpg
C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_22448408_10155772144559496_585237245757730819_n.jpg (32.21 KiB) Viewed 1470 times
chuckklr98
Member
Posts: 34
Joined: Thu Apr 19, 2018 6:55 pm
Location: 70452

Post by chuckklr98 »

I have a jet kit I can sell you. I'm only using the 0100 jet in my stella 166cc.. can sell ya ya the whole kit or only a few.

I bet the stock jet from mine will work fine. it was 150cc
milly
Member
Posts: 75
Joined: Sun Nov 26, 2017 9:31 am
Location: U.K.

Post by milly »

chuckklr98 wrote:I have a jet kit I can sell you. I'm only using the 0100 jet in my stella 166cc.. can sell ya ya the whole kit or only a few.

I bet the stock jet from mine will work fine. it was 150cc
Think postage would be expensive with you in the State's and me in Britain 😊
What sizes were your idle, main and mixer jets in the stock 150.
chuckklr98
Member
Posts: 34
Joined: Thu Apr 19, 2018 6:55 pm
Location: 70452

Post by chuckklr98 »

milly wrote:
chuckklr98 wrote:I have a jet kit I can sell you. I'm only using the 0100 jet in my stella 166cc.. can sell ya ya the whole kit or only a few.

I bet the stock jet from mine will work fine. it was 150cc
Think postage would be expensive with you in the State's and me in Britain 😊
What sizes were your idle, main and mixer jets in the stock 150.
only changed the main, it was a 96
milly
Member
Posts: 75
Joined: Sun Nov 26, 2017 9:31 am
Location: U.K.

Post by milly »

Was that before removing the restrictions?
chuckklr98
Member
Posts: 34
Joined: Thu Apr 19, 2018 6:55 pm
Location: 70452

Post by chuckklr98 »

milly wrote:Was that before removing the restrictions?
kept everything else stock.
Post Reply