Stella 2T wiring for rear add on light bar with directional

The original 2-stroke Genuine scooter and its 4-stroke manual and automatic offspring

Moderator: Modern Buddy Staff

Post Reply
ClutchConquerer
Member
Posts: 1
Joined: Wed Aug 28, 2019 2:45 am
Location: Chicago

Stella 2T wiring for rear add on light bar with directional

Post by ClutchConquerer »

:?: Does anyone have any tips for wiring in a rear add on directional light bar on a 2003 Genuine Stella 2T manual? Is there a main bundle somewhere that’s easily accessible? Owners guide wiring photo doesn’t seem to show one but I thought someone may have done this successfully and learned a shortcut or two.
rowdyc
Member
Posts: 7
Joined: Sat Dec 14, 2013 3:58 am
Location: DFW

Post by rowdyc »

You can just tie the directional light bar wires into the left and right signal wires under the tank. The signal wires connect to the hole that the cowl pins goes into. You will need to remove the tank.
User avatar
johnk
Member
Posts: 166
Joined: Mon Sep 03, 2018 9:42 pm

Post by johnk »

I don't know anything about lights or wiring, but slotrod65 has a ton of lighting mods, so you might find something by searching for his posts.
Post Reply